Announcement

Collapse
No announcement yet.

Holley 4160

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Holley 4160

    Fellas,
    I'm selling my original Holley 4160. Story on this carb is it sat for 8 months because we had no water in the lake this past summer. It wouldnt idle properly but ran great at speed. I elected to just buy a new one. After taking it apart I found both main jets on the primary loose. I dont think it caused my problem, but probably contributed. Im also positive it has a plugged or restricted idle passage, I just didnt want to deal with it to be honest. So it needs a good deep cleaning and a rebuild and it should be fine. Make me an offer..you pay shipping. I will post some pics probably tomorrow. I'll even include a nice sticker! Any ?'s feel free either here or pm. Cheers!
    Nik
    1988 PS190 Powerslot, INDMAR 351W, Edelbrock Intake, MSD Ignition,

  • #2
    Originally posted by learjet2230 View Post
    Fellas,
    I'm selling my original Holley 4160. Story on this carb is it sat for 8 months because we had no water in the lake this past summer. It wouldnt idle properly but ran great at speed. I elected to just buy a new one. After taking it apart I found both main jets on the primary loose. I dont think it caused my problem, but probably contributed. Im also positive it has a plugged or restricted idle passage, I just didnt want to deal with it to be honest. So it needs a good deep cleaning and a rebuild and it should be fine. Make me an offer..you pay shipping. I will post some pics probably tomorrow. I'll even include a nice sticker! Any ?'s feel free either here or pm. Cheers!
    Nik
    PM........................
    93 190
    .
    Don't be a boot licker
    .

    Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8

    sigpic

    ..Some of you give a whole new meaning to the phrase "another @sshole with a Mastercraft."

    RE: Thrall, Welcome to the club....
    NEW SKINS in TN... Leading Edge Marine Interior

    feedback on a TN company: http://www.mastercraft.com/teamtalk/...ad.php?t=58767

    .

    Comment


    • #3
      Did the new holly fix your issue? The reason I axe is mine idles good but she don't like hole shots, just dies....

      Comment


      • #4
        Originally posted by psychobilly View Post
        Did the new holly fix your issue? The reason I axe is mine idles good but she don't like hole shots, just dies....
        A fresh 4160 will do wonders for a nagging issue. Been there more than once. I hate to drop $500 on a new carb but it does put new life in performance after dealing with less than stellar performance.

        .
        93 190
        .
        Don't be a boot licker
        .

        Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8

        sigpic

        ..Some of you give a whole new meaning to the phrase "another @sshole with a Mastercraft."

        RE: Thrall, Welcome to the club....
        NEW SKINS in TN... Leading Edge Marine Interior

        feedback on a TN company: http://www.mastercraft.com/teamtalk/...ad.php?t=58767

        .

        Comment


        • #5
          Originally posted by psychobilly View Post
          Did the new holly fix your issue? The reason I axe is mine idles good but she don't like hole shots, just dies....
          Is you accelerator pump working? Perhaps no juice to provide the hole shot.
          - Peter
          TANDEM AXLE PACKAGE - $950 DELIVERED WHEEL IMAGE
          5 14X5.5 T06 WHEELS W/5 ST215/75R14 KENDA LOADSTAR RADIALS SS CENTER CAPS, LUGS, MOUNTED, BALANCED & READY TO INSTALL

          PM or email me for tire, wheel or package pricing.
          CARBURETOR REBUILDING - $125 + PARTS
          LED lights, Chrome & Powder Coated Lugs
          2 LED 6" BRAKE LIGHTS DELIVERED $25

          tiresplease@gmail.com

          Comment


          • #6
            May want to check the spring that controls the secondary too. Mine was broken, the biggest loop was in attached, making the spring to light weight
            1981 MasterCraft
            19' Skier 351W PowerSlot
            Long gone is the Trans AM waiting for another

            Comment


            • #7
              Originally posted by Cloaked View Post
              PM........................
              Clear your PM box as its full!
              1988 PS190 Powerslot, INDMAR 351W, Edelbrock Intake, MSD Ignition,

              Comment


              • #8
                Originally posted by psychobilly View Post
                Did the new holly fix your issue? The reason I axe is mine idles good but she don't like hole shots, just dies....
                Absolutely...Few seconds of cranking to fill the bowls and she idled like a champ. I have a few "tweaks" to do as I have a slight hesitation from cruising speed to full throttle. Been in contact with Holley and it has a pretty heavy spring in it so we are going to lighten it up. We thought it may be the accel pump cam but at that throttle setting the cam is flat and has no affect. I think the secondaries are "fluttering" in this situation if that makes sense. Out of the hole from idle it is just fine. Boat is out for interior and other stuff right now so will tune it in April/May. Thats why those pics I posted in another thread show the bilge so nasty.... Like I said in the first post, this old carb is fine, it just sat. I was caught off guard with the lake level dropping. Under my lift was dry dirt for about 6 mos. It just really needs to be deep cleaned and rebuilt. Cheers
                1988 PS190 Powerslot, INDMAR 351W, Edelbrock Intake, MSD Ignition,

                Comment


                • #9
                  hear ya go
                  Attached Files
                  1988 PS190 Powerslot, INDMAR 351W, Edelbrock Intake, MSD Ignition,

                  Comment


                  • #10
                    Hasn't cloaked pulled the trigger on that yet???
                    - Peter
                    TANDEM AXLE PACKAGE - $950 DELIVERED WHEEL IMAGE
                    5 14X5.5 T06 WHEELS W/5 ST215/75R14 KENDA LOADSTAR RADIALS SS CENTER CAPS, LUGS, MOUNTED, BALANCED & READY TO INSTALL

                    PM or email me for tire, wheel or package pricing.
                    CARBURETOR REBUILDING - $125 + PARTS
                    LED lights, Chrome & Powder Coated Lugs
                    2 LED 6" BRAKE LIGHTS DELIVERED $25

                    tiresplease@gmail.com

                    Comment


                    • #11
                      yea but his pm is full and I cant respond....so i figured id post some pics in case.
                      1988 PS190 Powerslot, INDMAR 351W, Edelbrock Intake, MSD Ignition,

                      Comment


                      • #12
                        Originally posted by learjet2230 View Post
                        Clear your PM box as its full!
                        Use the e-mail address I provided please. It's in the recent PM. Thanks
                        Last edited by Cloaked; 03-11-2012, 12:51 PM.
                        93 190
                        .
                        Don't be a boot licker
                        .

                        Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8

                        sigpic

                        ..Some of you give a whole new meaning to the phrase "another @sshole with a Mastercraft."

                        RE: Thrall, Welcome to the club....
                        NEW SKINS in TN... Leading Edge Marine Interior

                        feedback on a TN company: http://www.mastercraft.com/teamtalk/...ad.php?t=58767

                        .

                        Comment


                        • #13
                          Originally posted by thatsmrmastercraft View Post
                          Hasn't cloaked pulled the trigger on that yet???
                          Working a deal now..

                          Had to get back from church...
                          93 190
                          .
                          Don't be a boot licker
                          .

                          Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8

                          sigpic

                          ..Some of you give a whole new meaning to the phrase "another @sshole with a Mastercraft."

                          RE: Thrall, Welcome to the club....
                          NEW SKINS in TN... Leading Edge Marine Interior

                          feedback on a TN company: http://www.mastercraft.com/teamtalk/...ad.php?t=58767

                          .

                          Comment


                          • #14
                            Sold!!!!!!!
                            1988 PS190 Powerslot, INDMAR 351W, Edelbrock Intake, MSD Ignition,

                            Comment


                            • #15
                              Originally posted by learjet2230 View Post
                              Sold!!!!!!!
                              Thanks Nik.
                              - Peter
                              TANDEM AXLE PACKAGE - $950 DELIVERED WHEEL IMAGE
                              5 14X5.5 T06 WHEELS W/5 ST215/75R14 KENDA LOADSTAR RADIALS SS CENTER CAPS, LUGS, MOUNTED, BALANCED & READY TO INSTALL

                              PM or email me for tire, wheel or package pricing.
                              CARBURETOR REBUILDING - $125 + PARTS
                              LED lights, Chrome & Powder Coated Lugs
                              2 LED 6" BRAKE LIGHTS DELIVERED $25

                              tiresplease@gmail.com

                              Comment

                              Working...
                              X