Announcement

Collapse
No announcement yet.

MasterCraft Skier/ProStar/ProStar 190: A History (1968-2009)

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • MasterCraft Skier/ProStar/ProStar 190: A History (1968-2009)

    Preamble

    This is the third hull history thread that I have pulled together, the other two being:
    1995-97 ProStar 190/19 Skier/SportStar 19/ ProStar 195/X-5: A History
    1996-2000 ProStar 205/205V/Maristar205/X-star/X-2/X-1: A History

    This one – “MasterCraft Skier/ProStar/ProStar 190: A History” - is something that has been suggested by a number of people, on a number of different threads, on a number of different occasions. But this one was the most difficult to do as information on the older hulls is difficult to find. As a result, what follows should be treated as a DRAFT framework for others to comment on – think of it as a collaborative work in progress. Please feel free to comment on both what is here and what is not here. My hope is with some review and input from others that a decent history of these extraordinary boats can be produced.

    As with my two previous efforts, I loosely based this summary on the excellent example put forward by NSXBill on the ProStar 205 and have noted all the sources I used for my research at the bottom.

    I would also like to acknowledge the efforts of ETS in fact checking and proof reading the first release!

    Enjoy!
    Last edited by C36; 04-07-2009, 09:49 PM.
    MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
    Over 70 different decals to choose from!

  • #2
    Introduction

    Name:  2753ee643f04066064c1827a3af19aa8.jpg
Views: 1
Size:  68.1 KB

    For over four decades MasterCraft Boat Company has been building tournament tow boats, as shown in Figure 1. From its humble beginnings in the foothills of the Smoky Mountains MasterCraft quickly built its reputation on a workhorse three-event tow boat, pulling regional, national and worldwide tournaments.

    Name:  c38a0c034159ab044be4558bb453b79a.jpg
Views: 3
Size:  25.8 KB

    The in-board tournament ski boat was the genesis of the MasterCraft Boat Company. For the first eleven years of production, tournament ski boats were all MasterCraft built – from the first boat constructed in 1968 through the next eleven years until 1979. It wasn’t until after 1984, that MasterCraft branched out into the recreational ski market by offering sport-V-drives such as the MariStar series.

    By 1987, nineteen years after the first hull was built, MasterCraft boats had been used to set more American Water Ski Association (AWSA) records than all other manufacturers combined and MasterCraft was the established sales leader in the ski boat market (with annual sales of about $15 million).

    By 1993 (25 years after the company was founded) MasterCraft had built its 25,000th boat.

    By 1996, twenty-eight years after the first hull was built, it’s the boat chosen by more skiers all over the world than the next two ski boats combined.

    /edit (2009 Oct 9) production stats for 1993 added
    Attached Files
    Last edited by C36; 10-09-2009, 05:27 PM.
    MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
    Over 70 different decals to choose from!

    Comment


    • #3
      What is in a Name

      The model name “MasterCraft Skier” was used from 1968 until 1985 on MasterCraft’s tournament water ski hull.

      The model name “ProStar” was introduced eighteen years later in 1986. This change rebranded MasterCraft’s tournament ski boat the “ProStar”.

      One year later in 1987 MasterCraft added the “190” to the model name – resulting in the “ProStar 190”. The “ProStar 190” model name has remained on the closed bow version of the tournament ski boat ever since.

      But what about name “Stars and Stripes”? It would seem that “Stars and Stripes” may have started as a nic-name but it did appear offically as part of the 1993 decal set as it actually bore the moneker "Stars & Stripes 190" at the rear of the hull. This may not have ever reappeared after 1993.

      The “ProStar 195” model name was introduced in 2000 as the tournament ready open-bowed ski boat. This model was the forerunner for the “ProStar 197” model name, introduced by MasterCraft in 2002 to brand the latest version of the open bow tournament ski boat.

      The “ProStar” name has also been carried by a number of other MasterCraft performance ski boats over the years as well, including the ProStar 205, ProStar 205V, ProStar 209, ProStar 214, and ProStar 214V.
      Last edited by C36; 04-07-2009, 09:06 PM.
      MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
      Over 70 different decals to choose from!

      Comment


      • #4
        1968-1976 MasterCraft Skier

        The first generation MasterCraft tournament ski hull introduced in 1968 set a new standard for performance. This hull was originally called the “MasterCraft Skier” and it was the first hull created with hand laid fibreglass (for increased strength and better consistency).

        Name:  6d0adfc3cff856adca7a6963199fe77a.jpg
Views: 3
Size:  96.6 KB

        The 1968-1976 MasterCraft Skier was modest in size by contemporary standards being about 18’ long, 81” wide, and weighted about 2,000 lbs (as shown in Figure 2).

        These first generation hulls were powered by direct-drive inboard engines which may have been about 220 hp.

        These boats were fitted with only the bear essentials required for a serious ski boat:
        • a direct drive in-board engine
        • a driver seat and rear facing observers seat
        • ski pylon, complete with fixed cross arms at the top (no swivel)
        • a simple one-piece Plexiglass windshield (that was rounded at the corners)

        Some of the features most would now come to expect on a tournament boat, which were not included on the 1968 hull:
        • water ski mirror
        • tracking fins
        • swim platform
        • handle/tow eye on the transom
        • running lights
        • rear bench seat
        • trunk
        • cup holders

        The signature air scope on the deck was there even on the first hull (#1) and the exterior graphics of the first hull (#1) look strikingly similar to some late model wakeboard hulls – a solid colour hull with a white deck. The only decals which appeared on the first hull were a small “MasterCraft” decal (white font on black background) and vertical American flag – both applied on the side hull near the transom.

        Only 12 boats were produced the first year (1968). Production increased over the next five years to reach 52 boats in 1973. This hull remained in production for 9 years until 1976.

        By 1971, MasterCraft’s signature “Stars and Stripes” graphics (white stars and white pinstripes on a solid hull colour with a white deck) may have been added to the first generation hull. The color on Stars and Stripes hulls is all manufactured into the gelcoat but the stars and pinstripes are cut vinyl. By 1971 running lights and a waterski mirror also appear to have been added.

        Name:  12f98ab118056f77238811a17041442e.jpg
Views: 2
Size:  69.9 KB

        By 1972 the hull and deck became the same colour and two white stripes (in the gelcoat) ran parrallel around the hull. "MasterCraft" appeared on both sides of the hull between the two white stripes. The vertical American flag continued to appear on the side hull near the transom. Some of these hulls appear to have been powered by a Homan and Moody 302 with a Velvet Drive transmission.

        By 1973 a new colour accent stripe was added to the side of the hull (which wrapped all the way around the hull). White stars and MasterCraft logo (angled to the left) were located on the side hull stripe. The colour accent stripe was also repeated (with white stars) on the hulls bow, motor box and transom. The vertical American flag continued to appear on the side hull near the transom.

        By 1975 a slot (or concave in the hull above the propeller – not to be confused with the PowerSlot transmission which was introduced in 1980) may have been offered as part of “deluxe” options package (see picture below). Example of a dash from a 1975 can be viewed by clicking here and interior by clicking here.

        Name:  13b6c597726d59785bccd9142b293ef7.jpg
Views: 1
Size:  56.7 KB

        In 1976 MasterCraft introduced the first Marine Grade carpet (for longer wear), the first mufflers on a ski boat (for a quite ride), and introduces the first swim platform on a ski boat (to make entry and exit of the boat easier).

        By 1976 the “L” shaped observer’s seat also appears to have been introduced.

        Some of the 1976 models may have had textured decks (the texture was reported to be similar to the vinyl used to upholster the interior of the boat). These textured decks continued to appear until at least 1981.

        Name:  ba0e556d1e902ece07c7eb35791a934c.jpg
Views: 1
Size:  33.5 KB

        The 1968-1976 hull pulled:
        • the first National (US) Waterski Championship in Seattle (1972)
        • its first World Men’s Slalom Record (Kris Lapoint’s one at 38-off in 1973)
        • Men’s Trick World Record (1976)
        • Men’s Slalom World Record (Bob LaPoint in 1976)

        One of the early ads run for this hull (circa 1972) simply stated, “Smooth table – sharp wake for tricks [at lower speeds]. Small soft wake for slalom and jump.”

        /edit - production numbers in paragraph seven clarified
        /edit (2009 Oct 8) hull details updated for 1972 and 1973
        Attached Files
        Last edited by C36; 05-05-2010, 05:50 PM.
        MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
        Over 70 different decals to choose from!

        Comment


        • #5
          1977-1979 MasterCraft Skier

          Following this early run of success, the MasterCraft tournament hull underwent its first major redesign was released in 1977. One hundred of these second generation tournament boats were sold at the US Nationals held in Miami the year it was introduced (1977).

          Name:  6064c96099d52f3f58ce3fee83ed4d23.jpg
Views: 1
Size:  107.5 KB

          The 1977-1979 MasterCraft Skier was about 19’ long, 81” wide, weighted about 2,200 lbs (one foot longer, the same width and about 200 lbs heavier than the first generation hull).

          These 1977-1979 hulls were powered by 220 hp direct-drive inboard engines – some of the early models may have carried Escort Marine engines and some of the later models may have carried Pleasure Craft Marine (PCM) engines.
          • The 1977 model may have been powered by Ford 351 engine (marinised by Escort Marine) Holley 4 barrel Carb, 1:1 Borg Warner transmission.
          • The 1979 model may have been powered by Ford 351 engine (marinised by Pleasure Craft Marine (PCM)) and 1:1 transmission.
          These drive trains may have been right hand prop rotation.

          The 1977-1979 tournament boat introduced three tracking fins for the first time ever as part of the 1977 hull redesign to give this 19’ hull better directional control while pulling a waterskier (both in and out of the slalom course). A moulded instrument panel (for increased durability) and fibreglass seats were also introduced for the first time in 1977. The 1977-1979 hulls carried a one-piece plexiglass windshield that was rounded at the corners (similar to the previous generation) with the edge of the windshield being silver in 1977.

          Name:  66e86626714527bd60f1970755b3539c.jpg
Views: 1
Size:  67.7 KB

          Exterior graphics for the 1977-1979 hulls remained matching hull/deck colours with the “Stars and Stripes” graphics (white stars and white pinstripes which wrapped all around the boat - including stars and stripes on the transom). The number of stars on the front deck increased to four in 1979 (previously three in 1976).

          In 1978 the edge trim on the windshield switch to black (previously silver in 1977).

          The vertical American flag continued to be carried on the side hull near the transom until about 1978 when it was replaced by the ‘yin and yan’ decal.

          This 1979 model is an example of a textured grey top deck (as with some of the boats from other model years, the texture was reported to be similar to the vinyl used to upholster the interior of the boat). An example dash from a 1979 can be viewed by clicking here.

          By 1979 metal flake appeared on some hulls and colour “MasterCraft” (left leaning font) side hull decals were introduced. “MC* Competition Ski Boat MC*” (with a star inside the letter “C”) may have been introduced to the transom for the first time just above the band of stars and stripes. Note the font used was an old script very similar to Bookman Oldstyle and the word “Boat” is singular. This style of transom decal remained in use until about 1986. A limited number of hulls also begin to appear with white Maple Leaves (in place of the white stars) on the colour accent stripe.

          By 1979 the rear bench seat may have been added to the “LTD” version of the MasterCraft’s tournament boat. Eventually the rear bench seat became a standard feature on all Skier/ProStar models.

          Name:  3958fe2c820dd6b92e6ccc255e3b529e.jpg
Views: 2
Size:  75.4 KB

          The 1977-1979 hull:
          • pulled the first World Championships (1977)

          One owner of this hull noted they had a great slalom and trick wake, but are rough riding boats in chop due to the flat mid-tail section of the boat. Also, short line spray was pretty pronounced, especially if you were going into the wind.
          Last edited by C36; 04-07-2009, 02:01 PM.
          MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
          Over 70 different decals to choose from!

          Comment


          • #6
            In 1980 the third generation tournament hull was introduced. This third generation tournament hull was designed once again as three event boat (for trick, slalom and jump). The 1980-1985 hull was designed as a “variable planning” hull – it produced flat wakes at slalom speeds, but the wakes were also designed to have a solid, well defined lip at slower speeds for trick skiing. This concept has been carried forward into the later ProStar models and is one reason way these MasterCraft hulls are popular for wakeboarding as well. At the time this hull was introduced MasterCraft stated, “No other boat can offer a solid low-speed trick wake and a low profile, high-speed wake perfect for slalom, jumping and barefooting.”

            Name:  5f53a128590193935bb5f2e7358f827a.jpg
Views: 2
Size:  43.4 KB

            The 1980-1985 MasterCraft Skier was about 19’ long, 82” wide, weighted about 2,200 lbs (the same length, one inch wider and the same weight as the second generation hull).

            Name:  263cc2ee67d634851d5e97ed2072dc24.jpg
Views: 2
Size:  87.0 KB

            In 1980 a slight change was made to chine on the hull to reduce spray. The 1980-1985 hull was a modified-v with 4 degrees of deadrise at the transom. This hull may have been offered in two versions – standard and “PowerSlot”. The 1980-1985 “PowerSlot” hulls were reserved for boats delivered with a PowerSlot transmission (1.5:1 ratio manufactured by Borg Warner). The “PowerSlot” hull was now being used to draw attention to the new transmission (introduced the same year - 1980). In 1980 the prop rotation of these drive trains may have switched to left hand drive.

            Most boats produced during 1980-1985 appear to have been powered by 351 cubic inch Pleasure Craft Marine (PCM) engines. Although in 1981 and 1982 the standard engine may have been a 302 cubic inch engine. A 454 cubic inch engine may have also been an option as early as 1980. Transmission choices were either:
            • a standard transmission with a 1:1 ratio (paired with a three-blade 13 x 13 prop); or
            • an optional “PowerSlot” transmission with a wide gear ratio of 1.5:1 (paired with a Nibral three-blade 14 x 18 prop) for increased acceleration, and steadier pull.

            The “PowerSlot” transmission may have been initially introduced to meet the needs of the larger (more powerful) tournament skiers as the smaller props and gear was not acceptable for record capable tournaments (according to some). In 1983 (the first year tournament boats were certified by the AWSA) the AWSA may have only certified boats with the stronger pull.
            • According to a 1980 World Waterskiing Test and Analysis article 351/PowerSlot combination accelerated from idle to 30 mph in 5.10 seconds, had a top speed of 44 mph and had fuel consumption of 4.0 gph, 7.2 gph, and 10.1 gph at 25 mph, 32, mph and 36 mph respectively.
            • According to a 1982 Spray Magazine waterski tow boat test the MasterCraft (with PowerSlot transmission) took 8.43 seconds to travel 357.5 feet, while the other boats tested took between 8.85 seconds and 9.25 seconds. These differences increased significantly when the boats were retested over the same distance with four skiers (combined weight of 596 lbs and boat crew weight of 580 lbs) for a result of 11.14 second for the MasterCraft (with PowerSlot Transmission) and between 12.70 seconds and 14.21 for the other boats tested. To view graphs on 1982 MasterCraft ad click here.
            • In 1983 MasterCraft stated that the PowerSlot drive train could produce 310 ft/lbs at 1,500 rpm, 500 at 2,000 and 560 at 3,000 and could accelerate from zero to 16 in three seconds and zero to 35 in five (while the 1:1 package would go from zero to 10 in three seconds and zero to 20 in five).

            Potential trade-offs for the PowerSlot transmission may include:
            • Increased fuel consumption. The 1982 Spray Magazine waterski tow boat test noted fuel consumption (at a constant speed) for the MasterCraft (with PowerSlot transmission) was 11.88 gallons per hour at 36 mph or 14.23 gallons per hour with the four skiers in tow. These fuel mileage results were about average for all five boats tested.
            • Slightly lower top-end speed (typically a loss of about 1-2 mph when compared to same engine with a 1:1 transmission).

            The 1980 hull offered better wakes and still no spray at short-line lengths, three tracking fins, bigger prop (for more stability and response). Although the one-piece windshield was a similar shape to the previous two generation (rounded at the corners) – it may have been glass for the first time in 1980.

            The interior of the 1980 model featured a glove box and molded fibreglass storage compartment under the observer’s seat (which houses the battery and fire extinguisher), and an adjustable high back bucket driver’s seat.

            Standard features on the 1980 model included inland lighting, two Airguide speedometers, tachometer, fuel gauge, horn, dash lights, ski pylon, mufflers, Morse throttle control, ski mirror.

            Options for 1980 included fibreglass swim platform.

            Name:  6204dcc2fc4162d6ddb40997032e8ebc.jpg
Views: 1
Size:  138.3 KB

            The exterior graphics of the 1980 model remained similar to previous models - matching hull/deck colours (either sand-coloured or grey) with the “Stars and Stripes” graphics (white stars and white pinstripes on a variety of different coloured metallic stripes). A “MasterCraft” (now font sloping to the right) decal was placed on the side hull and ‘yin and yan’ decal was placed on the side hill near the transom. The “MasterC*raft Competition Ski Boat” (with a Star inside the “C” of MasterCraft now) was moved inside the two pinstripes on the transom. This transom decal (with the star inside in the “C”) appears to have remained in use until 1990.

            In 1981 the standard engine was a 302 cubic inch with the 351 cubic inch engine being offered as an option (both came with four barrel carburetors).

            In 1981 teak replaced fibreglass as the swim platform material. Some have said that the fibreglass swim platform dampened (quietened) the exhaust rumble, although they may not have been as aesthetically appealing. The fibreglass platforms at this time were covered with matting that was not much more than a sticky back non-skid surface.

            In 1982 the three-piece square windshield was introduced (with safety glass) and three engine options were offered – the standard 302 cubic inch, the optional 350 cubic inch, and the optional 351 cubic inch. A hideaway mirror (which could be folded into the deck when not in use) was also offered in 1982.

            By 1983 MasterCraft was using an intricate ducting system to transfer air to the engine box. A sizable storage locker is provided behind the observer’s seat.

            In 1983 the standard engine was upgraded to a 351 cubic inch 240 hp Ford V-8 (marinised by Pleasure Craft Marine (PCM)). Fibreglass stringers were also introduced (to increase strength, eliminate deterioration and reduces vibration), resulting in an all-fibreglass “uni-frame” hull construction (see more detail below). A new experimental interior (using GT vinyl) was also introduced on a very limited basis. The 1983 model also offered two drain plugs (assuring water drainage at any angle) and metal flake pinstripes molded into the hull as standard (previously an option), and two stops on the floor at the front of the motor box (so the box could not be pushed into the engine’s drive belts by observer’s feet).

            The range of colours were also expanded from four to nine in 1983 – sand/brown (1982 shown), sand/blue, sand/red (1984 shown), sand/orange, grey/red (1985 shown), grey/blue (1984 shown), grey/silver (1985 shown), grey/black, blue/blue (Upholstery: sand, greyblue. Carpet: charcoal, blue, brown). By 1983 the “MasterCraft Tournament Ski Boats” transom decal also may have been in use.

            In 1983 although the design of the hull did not change, the way it was constructed did. By 1983 MasterCraft was using all fibreglass construction (wood stringers were eliminated), along with an intricate ducting system to transfer air to the engine box. A sizable storage locker is provided behind the observer’s seat. MasterCraft used four molds to build the “uni-frame” hull – one each for the deck, cockpit, stringers and hull. Foam was also used to provide structural floatation. MasterCraft built two display boats and cut them in half to use a boat shows so dealers and customers could see the revolutionary way the inner workings of these hulls were built.

            Name:  e7a8285457764f9affb7cdfe583d6d6f.jpg
Views: 9
Size:  95.6 KB

            In 1983 standard equipment included triple tracking fins, ski pylon, mirror, instrumentation (dual speedometers, tachometer, ampmeter, hour meter, oil temperature and fuel), windshield, coaming pads, deluxe (contoured) deck, special two-tone colour, metalflake stripe, inland lighting, centre drain, transom drain, lift rings, ice chest, automatic bilge pump, blower, muffler system, E-Z change oil kit, 25-gallon fuel tank, fire extinguisher, and battery.

            In 1983 optional equipment included PowerSlot drive train, padded motor box, custom rear seat, teak swim platform, trick release, closed cooling system, boat cover, barefoot boom, heater, bimini, and bottom paint. However, the 1983 model did not have a ski eye/handle on the transom (for use when passengers are seated in the rear seat).

            In 1985 transom ski bar and adjustable driver’s seat may have been introduced as standard equipment for the first time. In 1985 optional equipment may have also included an AM/FM stereo cassette player. In 1985 colour options included gray/red, gray/blue, gray/black, gray/gray, beige/red, beige/blue, beige/brown, and beige/black. By 1985 some the hulls may have been delivered with black stars and pinstripes.

            1985 was the last year of the MasterCraft carried the stars as side-hull graphics until the stars returned on the 1993, 25th anniversary edition.

            This hull was approved as a tournament tow boat by the American Water Ski Association (AWSA) from 1983 (the first year the AWSA certified tow boats) to 1985.

            The 1980-1985 hull:
            • set a new men’s Slalom Waterski World Record (Bob LaPoint in 1980)
            • was chosen to be the official two boat at Cypress Gardens and Marine World (1982)
            • pulled MasterCraft’s first Women’s Slalom World Record and new Men’s Tricks and Slalom World Records (1982)
            • pulled three World Records – Women’s Tricks, Men’s Freestyle, Men’s Slalom (1984)
            • pulled Women’s Tricks World Record (Britt Larsen with 7230 points in 1985)

            According to a 1980 World Waterskiing Test and Analysis article (351/PowerSlot):
            • “It provides performance and distinctive styling in an exceptional boat…”
            • “At all speeds over 20 mph there is such a small wake that most skiers will not notice it is there.”
            • “At trick skiing speeds (approximately 15 mph) the wake has a sharp crest …”
            • “Manoeuvrability of the wide MasterCraft hull is excellent. It turns sharply, quickly and level. In fact it might be one of the sharpest turning inboard ski boats on the market.”
            • “The same bottom design that provides all the favourable wake characteristics make the boat a little rough riding in unfavourable water. Still the ride is an improvement over the original models and is never intolerable.”

            According to a 1983 Powerboat Magazine review, the 1983 MasterCraft PowerSlot:
            • “I’ve never driven a mid-engine rig that felt smoother and more responsive.“
            • “…the hull tracks without transom sway even when the skier is making hard slalom cuts.”
            • “…performs better than expected in ruffled conditions, but you can still tell it’s a flat bottom.”

            According to some skiers, this hull had a “crisp” trick wake at lower speeds and a soft slalom wake. According to one owner, the 1980-1985 hull, as with the older tournament boats, can be a bit of a challenge to drive in the course - especially with an aggressive short-line skier. However, this owner went on to say that short-line driving in the course can be “learned”, but it is not as easy as with some of the more modern hulls.

            /edit (15 Apr 2009) = chine change (1980), 454 ci option (1980), fuel mileage and acceleration (1980), glass windshield (1980), interior features (1980), standard features (1980), optional features (1980), performance review (1980)
            / edit (17 Oct 2009) = 4 degrees deadrise, Nibral prop, transom ski bar (1985), adjustable driver's seat (1985), colour options (1985)
            Last edited by C36; 10-17-2009, 04:00 PM.
            MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
            Over 70 different decals to choose from!

            Comment


            • #7
              1986 ProStar (the “transition” year)

              Even though the hulls on the MasterCraft tournament boats (below the rub rail) look very similar (from the side) year-to-year from about 1982 to 1990, there are differences.

              Name:  7b5e58ba7ce7fcede2a843b5d181fcd1.jpg
Views: 1
Size:  56.6 KB

              Name:  8e1b63e1bf7252c8c33d527df2641f7c.jpg
Views: 1
Size:  43.7 KB

              1986 was a transition year for the tournament hull and this model year is unique for the following reasons:

              • the deck of the boat was the same as the 1985 model
              • the hull of the boat was similar to the 1987-1990 hull, including the addition of closed prop slot called a “dish” (more detail below)
              • interior used was particular to this year
              • dash used was particular to this year
              • "rainbow' graphics were particular to this year
              • engines also seem to have changed during this model year from PCM to INDMAR

              Name:  228de4d738d82ed8ac0a2ea9cae0a52e.jpg
Views: 1
Size:  36.7 KB

              Prior to 1986 the use of PowerSlot hull was reserved for boats delivered with a PowerSlot transmission. In 1986 all hulls – 1:1 transmissions and 1.5:1 transmissions – came equipped with PowerSlot hulls (with the closed prop “dish” or concave divit in the hull by the prop). The closed slot or “dish” has been suggested to have to the following benefits:
              • knocked down prop wash (for a cleaner table)
              • helped the boat adhered to the water a little better (for better tracking)
              • added lift to the transom while at speed (much like “hook” in the trailing edge of the bottom/transom used in later years)
              • allowed more room for the larger prop (which came with the 1.5:1 PowerSlot transmission)

              Name:  5c0f6fc2f114397dd4351fb24de1e58c.jpg
Views: 1
Size:  73.4 KB

              This hull was approved as a tournament tow boat by the American Water Ski Association (AWSA) in 1986.

              The 1986 hull pulled:
              • pulled Men’s World Record Jump (203’ by Mike Hazelwood in 1986)

              Name:  94b3b7d39538e909a42a3b02d0746b32.jpg
Views: 1
Size:  43.1 KB

              /edit (2009 Apr 17) = image from 1986 MasterCraft brochure added
              Last edited by C36; 04-17-2009, 02:36 PM.
              MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
              Over 70 different decals to choose from!

              Comment


              • #8
                1987-1990 ProStar 190

                MasterCraft introduced this hull in total in 1987 as the fourth generation tournament boat. In 1987 MasterCraft added a new deck and distinctive “jet-fighter” like windshield to the hull. The new deck for this hull was flat (no hood scope) for the first time. With these changes in place, this hull did not change again until 1991.

                Name:  1bfe7c324fbf083b68ce4847e2b14d8c.jpg
Views: 1
Size:  55.0 KB

                The 1987-1990 MasterCraft ProStar 190 was about 19’ long, 80” wide, weighted about 2,200 lbs (the same length, two inches narrower and the same weight as the third generation hull).

                Name:  f140de5cd9d107c951fc1c2a0f6027f8.jpg
Views: 1
Size:  55.0 KB

                These boats appear to have been powered by 351 cubic inch 240 hp V8 engines coupled with a 1:1 transmission (paired with a 3-blade 13 x 13 prop) as standard equipment. The 1.5:1 “PowerSlot” transmission was offered as an option. A number of engine options were also offered – 350 cubic inch (260 hp), or 454 cubic inch (390 hp/425 hp).

                From 1987 to 1990 the ProStar all hulls had the closed slot or “dish” (concave divit in the hull by the prop) regardless of which transmission it had – 1:1 transmission or 1.5:1 PowerSlot transmission.

                In 1987 the exterior graphics on these hulls included a colour accent strip (which included both a thin band of colour slightly above the rub rail and a thick band of colour below the rub rail that swept down toward the water line near the transom). The MasterCraft side hull decal now had a horizontal slash through it and these boats also now carried a “ProStar 190” decal and symbol on the side hull near the transom – typically both in white), and a white “MasterCraft Competition Ski Boat” transom decal (now in a more modern Hemihead426 style font). Note the star inside the “C” of MasterCraft also disappeared from both the side hull decal and the transom decal but he word “Boat” remained singular on the transom decal.

                Name:  6364b9585546db5d09c8751505473ccb.jpg
Views: 1
Size:  65.7 KB

                In 1988 standard equipment included dual tournament speedometers, convex mirror, five-piece windshield (with no centre mullion), battery, horn, automatic bilge pump, fire extinguisher, muffler system, E-Z change oil kit, fuel tank, triple fins, ski tow bar, inland lighting, blower, adjustable driver’s seat, colour coordinated carpet, centre drain, lift rings, coaming pads, drink holders, padded motor box, transom ski tow eye, side ski lockers, VDO gauges, audio oil and temperature warning, safety engine stop switch, custom rear seat, and teak swim platform.

                In 1988 optional equipment included Power Slot package (see above), engine options (see above), fresh water cooling, removable brackets for teak swim platform, boat cover (colour coordinated), barefoot boom, trick release, heater, sun top, deluxe stereo package, and ‘Safe-T-Top”.

                In 1989 MasterCraft introduced the WearGuard ski pylon (to reduce rope wear and make waterskiing smoother by eliminating rope ratcheting which could occur on a fixed pylon).

                In 1990 a tilt steering wheel was introduced and included as standard equipment in the 1990 ProStar 190 and MasterCraft may have also introduced the first Limited Edition ProStar 190 which may have went on to become the Sammy Duvall Signature Limited Edition in 1995.

                Name:  6be3a2bf7bf7dcf9a42055e6933c1fba.jpg
Views: 1
Size:  120.8 KB

                This hull was approved as a tournament tow boat by the American Water Ski Association (AWSA) from 1987 to 1990.

                The 1987-1990 hull pulled:
                • new World Record in Women’s Slalom and Women’s Tricks (1988)
                • Women’s Jump World Record three times (1988)
                • Men’s Jump World Record (1988)

                According to some skiers, this hull had a “sharp” slalom wake. Although the 1987-1990 hull was also designed as a three-event hull it has a decent (but not outstanding when compared to some of the other ProStar hulls) wake for wakeboarding at lower speeds.

                /edit (2009 June 5) - added reference to first ProStar 190 limited edition in 1990
                /edit (2009 Oct 8) - tilt steering introduced as in 1990
                /edit (2010 Feb 18) - two typos corrected in the last paragraph
                Last edited by C36; 02-18-2010, 05:56 PM.
                MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
                Over 70 different decals to choose from!

                Comment


                • #9
                  1991-1994 ProStar 190

                  The Pro Star 190 was redesigned again in 1991 as the fifth generation tournament boat. Many have come to regard the 1991-1994 hull as one of the best slalom hulls MasterCraft ever created. This hull also featured very elegant sweeping lines.

                  Name:  3f8b02d163c709e96d016438034522bd.jpg
Views: 2
Size:  35.5 KB

                  The 1991-1994 MasterCraft ProStar 190 was 19’5” long, 85” wide, weighted about 2,450 lbs (five inches longer, five inches wider and 250 lbs heavier than the fourth generation hull).

                  The standard drive train on this hull may have been a 240 hp engine coupled with a standard 1:1 transmission. The 1.5:1 transmission appears to have been offered as an option. In 1992 and 1993 several other engine options were offered including:
                  • (351 cubic inch) Ford V-8 310 hp (fuel-injected) engine
                  • (351 cubic inch) Ford V-8 285 hp engine
                  • (350 cubic inch) Chevrolet V-8 260 hp engine
                  • (454 cubic inch) Chevrolet (high-performance) engine

                  Changes introduced with the new hull in 1991 were aimed at adding more space in the cockpit and improving on the already excellent skiing wakes of the 1987-1990 ProStar 190.

                  Name:  9bd349a12553d5462d9c6793b902fd9b.jpg
Views: 1
Size:  66.2 KB

                  To achieve this the 1991 hull design used:
                  • a modified semi-vee with 25 degrees entry that gradually decreased to a flat bottom at the transom
                  • soft, stepped reverse chines
                  • a pair of lifting strakes (used forward of the tracking fins)
                  • closed-relief cavity or “dish” (directly above the prop) is used to reduce prop turbulence (or “wash”)

                  These changes to the hull design resulted in more wetted surface (more drag which would require more horsepower to achieve similar performance under certain conditions).

                  The outside the 1991-1994 hull featured a three-piece wrap-around curved windshield (with no centre mullion) and a forward sloping transom that was mounted with a removable teak swim platform.

                  Name:  58b1cdf5e1de48541bf23696bc8bd37c.jpg
Views: 2
Size:  93.3 KB

                  Inside the boat the 1991 model introduced a redesigned instrument pod. It also came equiped with a tilt steering wheel and a centre mounted Cipa mirror. Ample storage was provided behind the hinged observer’s seat. The rear bench seat is fully removable and there are two stainless steel grab rails mounted to the gunnels. Noise levels in the boat were kept low with crossflow mufflers.

                  Optional equipment in 1991 included engine options (see above), PowerSlot package (see above), boat cover, cockpit cover, fresh-water cooling, heater, Kenwood stereo system, hot and cold shower, Safe-T-Top with removable brackets, sun top, trick release, single axle trailer, spare tire, trailer brakes, and galvanized trailer.

                  The exterior graphics of the 1991-1994 hull typically featured white decks and white hulls with a colour accent strip (entirely below the rub rail that swept down toward the water line near the transom). These hulls were also available in reverse gel coat options (coloured deck, white strip, coloured hull bottom). These hulls also carried “MasterCraft” side hull decals (leaning to the right with a horizontal slash through it), “ProStar *** 190” model decals (on the side hull near the transom), and “MasterCraft World Record Ski Boat” decal appeared on the transom for the first time (the words “World Record” replacing “Competition” on the transom decal), but the word “Boat” remained singular.

                  In 1992 MasterCraft introduces the first electronically fuel injected (EFI) engine in the marine industry - the LT-1 Corvette (optional) engine. Although the LT-1 was introduced in 1992, it may have been for the 1993 model year.

                  In 1993 the ProStar 190 came standard with the 351HO and the LT1 was an option (although rare). The horizontal slash also seems to have been dropped from the “MasterCraft” side hull decals and the word “Boat” became “Boats” (plural) on the transom decal for the first time – “MasterCraft World Record Ski Boats”. A third accent colour may also have been added to the gelcoat of the hull – resulting a four-colour hull and a two-colour deck. Other changes in 1993 may have included improved driver’s seat lumbar/lateral support, new dash clock, gas struts being added to the engine box, and grab bar being added to the transom. MasterCraft also produced a "Limited Edition" ProStar 190 in 1993.

                  In 1994 the ProStar 190 became the first ski boat to come standard with EFI.

                  Name:  79e5a77cf136a8dd8cbe9d331e6dffcd.jpg
Views: 1
Size:  104.3 KB

                  The 1991 hull may have only been AWSA approved with MasterCraft's PowerSlot (1.5:1) transmission (as the 1991 hull with the 240 HP engine and 1:1 transmission may not have passed the AWSA boat test (potentially due to the additional drag of the increased wetted surface of the new design in combination with the weaker pull of the smaller engine and 1:1 transmission). This hull would remain in production until 1994 and may have been AWSA approved from 1992 to 1994 with both the 1:1 transmission (likely with other engine options than the 240 HP) and 1.5:1 PowerSlot transmission.

                  The 1991-1994 hull:
                  • pulled Men’s World Record Jump (220’ by Sammy Duvall in 1992)

                  Tracking and skier pull rated “best in test” in the 1991 Waterski Magazine Boat Buyer’s Guide (with 351 PowerSlot package).

                  Both long line (at lower speeds) and short line (at higher speeds) were rated in the “best-of-test” range in the 1993 Waterski Magazine Boat Buyer’s Guide.

                  When compared to earlier models some have said the 1991-1994 hull had “crisp” handling, excellent (smaller) slalom wake with only a hint of a rooster tail at longer line lengths. Spray was reduced about one line length off the previous hull (any spray which might be encountered at 38 or deeper is “modest”). The wakes themselves were rated as “excellent”, particularly in the shorter lengths. At 15 to 28 off there is a small rooster tail that can be seen, but not felt. The trick wakes (through a range of lower speeds) also rated “high” (small to medium wakes with very good shape). The trade-off for these stealer ski wakes was what some have described as a rather rough ride in open water.

                  /edit (2009 June 5) - added reference to first Sammy Duvall Signature Limited Edition hull being made in 1991
                  /edit (2009 Oct 8) - first time for tilt steering was removed from 1990, EFI standard moved from 1993 to 1994 and 351HO and the LT1 was an option added to 1993
                  /edit (2009 Oct 9) - deleted reference to Sammy Duvall Signature Limited Edition in 1991 (introduced in 1995) and added reference to "Limited Edition" produced in 1993
                  /edit (2009 Oct 17) - deleted adjustable driver's seat being introduced (1993 & 1994)
                  / edit (2010 Oct 13) - grab bar added to transom in 1993
                  Last edited by C36; 10-13-2010, 07:17 PM.
                  MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
                  Over 70 different decals to choose from!

                  Comment


                  • #10
                    1995-1997 ProStar 190

                    This hull was originally introduced by MasterCraft in 1995 as the ProStar 190 - MasterCraft’s premier tournament ski boat. This sixth generation tournament hull served as the ProStar 190 from 1995-1997. MasterCraft’s 1995-1997 hull is also considered an all-time favourite by many.

                    Name:  eeaa29513478d03c383f84984f8243c3.jpg
Views: 1
Size:  84.1 KB

                    The 1995-1997 version of the ProStar 190 was 19’5” long, 85” wide, weighted 2,450 lbs and had a draft of 22” (same length, same width and same weight as the previous version). The load capacity for this 2,480-pound ProStar 190 is nine people with a fuel capacity of 31 gallons.

                    The 1995 ProStar 190 came standard with the TBI 350 w/275 hp engine, 1:1 transmission (with an OJ 13 x 13 three blade propeller). One engine option was offered - MPI 310 hp (LT-1). The LT-1 increased to 318 hp in 1996 and then again to 328 hp in 1997. A 1.5:1 PowerSlot was also available as an option (with an OJ 14 x 18 propeller).

                    Name:  23025385c4f4ecc157fba102b4f2452a.jpg
Views: 1
Size:  26.8 KB

                    The 1995-1997 ProStar 190 hull enters the water at about 26 degrees and flattens out to six degrees at the back. The 1995 to 1997 hull used a number of design changes specifically to reduce spray - twin strakes knock down spray; then parallel slots channel the spray to the back of the hull; and stepped chines flatten the spray and keep it close to the hull.

                    Name:  b69b4c94d0a48d05601064e521d51db2.jpg
Views: 2
Size:  113.8 KB

                    The 1995-1997 hull also provides lots of freeboard, substantially larger cockpit, and deep seating (driver and passenger). Although the same length (19’5”), width (85”), weight (2,450 lbs), and draft (22”) as the previous generation ProStar (offered from 1991-1994), the 1995-1997 version offered more interior room by widening the inside and pushing the cockpit and windshield 6” forward. The 1995-1997 version also offered a little more storage capacity as well. The battery was also moved in 1995 to a location under the front observer seat (making it easier to get to).

                    Standard equipment on the 1995-1997 ProStar 190 included three directional fins, a bow lifting ring, black framed wrap-around windshield (four-piece with a centre mullion), windshield mounted ski mirror, two-colour accent interior, forward storage behind the tournament sized observer’s seat, swivel ski pylon, black non-glare dash with electromechanical gauges (with two speedometers separated by a tachometer), stainless steel passenger hand rails, back seat which can be removed or converted to a sun deck (but be sure to secure it before towing on the highway), rear handle/towing eye, and teak swim platform.

                    Optional equipment on the 1995-1997 ProStar 190 included a closed cooling system, boat and cockpit covers, heater, sun top, and shower.

                    Exterior graphics on the 1995-1997 ProStar 190 typically featured white deck and white lower hull. Two colour accent stripes ran the length of the hull about half way down each side of the hull. If a main exterior gelcoat colour was used, it was applied from just above the two colour accent stripes up to the bottom edge of the rub rail. The tail end of the two colour accent stripes sweep down toward the waterline as they approach the transom (to the rear of the engine box). More than 10 different colour combinations (two colour accent stripes and main gelcoat colour (if used)) were produced between 1995 and 1997. A large “MasterCraft” decal and "ProStar 190 Electronic Fuel Injections decal" were both featured one on each side of the hull above the colour accent stripes. In all three years (1995-1997) the MasterCraft logo was colour matched to one of the two accent stripe colours. In 1997 the MasterCraft logo was moved below the two colour accent stripes.

                    1995 may have been the first year MasterCraft produced the Sammy Duvall Signature Limited Edition hull – special options and special color scheme.

                    In 1996, MasterCraft changed the ProStar 205 to mirror the changes made to the ProStar 190 in 1995. Note the ProStar 205V went on to become the original X-Star/X-2/X-1 with legendary wakeboard performance.

                    The 1995-1997 ProStar 190 hull proved to be so versatile it remained in production for eight consecutive years (1995-2002) under five separate model names – ProStar 190, 19 Skier, SportStar 19, ProStar 195, and X-5.

                    Name:  52f6cb939edc57e977b106ddf67c15ab.jpg
Views: 2
Size:  46.9 KB

                    This hull was approved as a tournament tow boat by the American Water Ski Association (AWSA) in the following six years: 1995, 1996, 1997, 1999, 2000, 2001 – although as different models.

                    As a tournament tow boat this hull pulled 12 world records altogether in five disciplines - men's slalom, men's trick, men's jump, women's slalom, and women's trick.

                    Compared to the previous hulls the 1995-1997 ProStar 190 reduced spray (pretty much eliminated) and improves slalom waterskiing.

                    Compared to the 1991-1994 ProStar 190 (arguably the best slalom wake ever), the 1995-1997 ProStar 190 had improved tracking, reduced spray (chine spray nearly became a non-factor), slightly taller slalom wake (but still exceptional), improved bare footing performance, and greatly improved open water ride. Waterski Magazine also rated this hull well for barefoot, wakeboard, trick, and kneeboard in their 1996 Boat Buyer’s Guide.

                    Since the 1995-1997 ProStar 190 hull is slightly smaller than the 1998-2000 ProStar 190 hull, some have suggested that the 1995-1997 ProStar 190 hull is a little more nimble than subsequent versions of the ProStar 190 (1998-2000 and Evo versions). The 1995-1997 version of the ProStar 190 hull also has slightly more freeboard than the ProStar 190 Evo hull (2001 to current).
                    Last edited by C36; 10-09-2009, 06:15 PM.
                    MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
                    Over 70 different decals to choose from!

                    Comment


                    • #11
                      1998-2000 ProStar 190 (fourth tracking fin, a foiled (winged) rudder, and hydrorails)

                      In 1998, the Pro Star 190 hull changed once more when the seventh generation tournament hull was introduced. This hull was originally introduced by MasterCraft in 1998 with three (3) tracking fins. MasterCraft has stated that the 1998 ProStar 190 hull dramatically lowers spray and improves tracking. However, as one water skier noted, “To state that the redesign of the 1998 ProStar 190 has sparked a great deal of discussion amongst water ski enthusiasts would be an understatement.”

                      Name:  beed01cc63250934dfb2827f4247dfe5.jpg
Views: 1
Size:  94.6 KB

                      The 1998-2000 MasterCraft ProStar 190 is 19’6” long, 85” wide, weights about 2,600 lbs (one inch longer, the same width and 150 lbs heavier than the sixth generation hull).

                      The standard drive train on these boats was the (GM V8) MX MAX (5.7L) multi-port EFI 330 hp engine coupled with a 1:1 transmission (4-blade prop). The (GM V8) LT-1 (5.7L) EFI 340 hp engine was offered as an option as was the 1.5:1 PowerSlot package (which included 4-blade 14 x 20 prop with Cadillac Northstar phased port EFI 32 valve 4.6L V8 240 hp engine).

                      Name:  350e1b79944cc97b2631d1f50894f0b2.jpg
Views: 1
Size:  114.0 KB

                      The new 1998 “ProWake” hull shape had a running (or planning) surface that was designed to include:
                      • variable deadrise to permit a shaper entry angle (for all-event wakes, a softer ride and better control)
                      • chine angles and spacing are combined with spray relief pockets (to minimize spray by deflecting it back into the water away from the skier)
                      • strake placement (tailors wake at different speeds)
                      • more forward vee and front-to-back hull rocker or bottom curve (to ensure smooth ride in all conditions)
                      • less drag (all better performance under heaver loads and improve overall fuel economy)

                      Name:  bc94c2f60d583716fa4e9096131c9bb7.jpg
Views: 1
Size:  67.7 KB

                      MasterCraft engineers using CAD/CAM design and engineering software, developed in the automotive industry, to make major changes included in the 1998 ProStar. The 1998 ProStar saw changes to the topside, bottomside and inside, including:
                      • New Monocoque™ fitted composite stringer system (bringing aerospace technology to ski boats). This eliminates one step from the construction process. Instead of bonding a separately constructed stringer system onto the hull floor, the stringers are now laminated directly onto the hull using a primary bond (for a more rigid hull skeleton).
                      • New MasterCraft Oscillation Dampering System (M.O.D.S.™) used aerospace materials and a unique structural configuration (to dramatically reduce vibration and noise).
                      • The stern width increased 6 inches (giving rear-seat passengers a little extra room) – although the beam remained at 85 inches.
                      • Storage capacity has been increased behind the now lockable observer’s seat.
                      • The old step-over is now a padded rear locker (large enough for gloves, ropes and binding soap).
                      • The windshield has been moved forward, the observer’s seat redesigned and the engine moved back (to provide more space for the driver and passengers up front).
                      • Four panel wrap-around (with a centre mullion) windshield.
                      Air vent located just below the centre of windshield and recessed into the deck.
                      • The dash has been altered and the steering wheel repositioned.
                      • Modular rear seat (which can be raised to a sun pad) has been added.
                      • Standard engine option was upgraded (to the new 308-hp MasterCraft Power Vortec MX Plus throttle-body EFI V-8).
                      • New high-pressure fuel pump delivers fuel (to improve combustion, increase power, and lower emissions)
                      • A four-blade prop is now standard equipment.
                      • New graphics.

                      Optional equipment in 1998 included fibreglass platform, fresh-water (closed) cooling, heater, Kenwood AM/FM cassette stereo system, depth finder, Safe-T-Top, sun top, trick release, single axle trailer, hinged tongue, and spare tire. In 1999 a CD changer was also offered as an option.

                      Exterior graphics on the 1998 typically featured white deck and white lower hull. Two colour accent stripes (a thick band and a thinner stripe) ran the length of the hull about half way down each side of the hull. The thicker gelcoat colour accent stripe was applied from just above the second thinner stripe to the bottom edge of the rub rail. The tail end of the two colour accent stripes sweep down toward the waterline in a “V” shape as they approach the transom (to the rear of the engine box). A large “MasterCraft” decal was again featured on each side of the hull – this time below the two colour accent stripes. In all three years (1998-2000) the “MasterCraft” logo contained the silhouette of a water skier inside of the “M” in “MasterCraft” and was colour matched to the larger colour accent stripe.

                      When Waterski Magazine reviewed the 1998 ProStar they saw the new hull as, “… a variation of the original Stars and Stripes design that, from underneath, looks remarkably similar to the '95-'97 version. It's hard to notice the shallower keel, redesigned strakes and variable deadrise from underneath, but you see the results at the end of the rope.”

                      In its second year of production (1999) in addition to a new sleek top deck a fourth tracking fin, a foiled rudder, and hydrorails (see photo below) were all introduced during a production change. These later three changes reportedly made the hull perform considerably better. The hydrorails were design was to add wetted surface area to the stern on the boat (added a slight amount of lift to the stern). The rails along with a “Dual Plane” rudder (with the fin angle being the same as the prop shaft angle) made the hull perform differently (both driving and skiing). Some have stated that this hull was very difficult to powerturn without the hydrorails. Hydrorails came standard on the 1999 and 2000 hulls. Most of the 1998 hulls were also retro fitted with the hydrorails, although some remain without them.

                      Hydrorail
                      Name:  fab8bb9327f9ee53d2331106606170db.jpg
Views: 2
Size:  82.6 KB

                      No changes were made to the 1998-2000 ProStar 190 hull itself (beneath the water line) between the 1999 and 2000 model years.

                      In 1999 MasterCraft introduced the 330 HP LTR engine with the Cadilliac NorthStar System; the advanced fuel delivery system (the industry’s only tapered bottom fuel cell with an in-tank pump for improved performance and increase in usable fuel); a redesign of the interior (with 12% more useable space); a two-part motor box constructed of lightweight composite materials (to enable routine maintenance checks by lifting the top half only - the entire box can be lifted for additional access to the engine); and an all-new command centre instrument panel.

                      In 2000 MasterCraft introduces the MasterCraft Training Systems (MTS), which is a ballast tank under the observer’s seat in the storage area and holds up to 185 pounds which can be controlled from the dash (to simulate the weight balance of tournament conditions); reworked air intake vents (which deliver 25% more air to the engine box and boost fuel efficiency by as much as 10%); introduced a honeycomb core to the rear seat (to reduce weight); and a teak swim-platform transom-saver (to guard the boat transom from accidental scratches by skis and wakeboards). In 2000 the transom decal also became “World Record Towboats” for the first time (with the words “Towboats” replacing the words “Ski Boats”). MasterCraft may have also produced a number of “limited edition” ProStar 190’s in 1990.

                      Name:  8b307ea7d0715ce5ce80b766ed8dc1f9.jpg
Views: 1
Size:  86.0 KB

                      This hull was approved as a tournament tow boat by the American Water Ski Association (AWSA) from 1998 to 2000.

                      When Waterski Magazine reviewed the 1998 ProStar they stated, “While spray hasn't been a significant factor since the last redesign in 1995, the wakes are indeed softer, and the bothersome roostertail at 22 off has been reduced to a thin line of foam that's a hindrance only to flat skis.”

                      /edit (2009 Oct 9) reference to "limited edition" ProStar 190 added to 1990
                      Last edited by C36; 05-05-2010, 06:29 PM.
                      MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
                      Over 70 different decals to choose from!

                      Comment


                      • #12
                        2001-2009 ProStar 190/2002-2009 197 (EVO® hull)

                        In 2001, the Pro Star 190 hull was revamped once again with the introduction of the EVO® hull – MasterCraft’s eighth generation tournament hull.

                        Name:  b4f1f750b7dc6bd658941bde874b92f2.jpg
Views: 1
Size:  96.1 KB

                        The 2001-2009 MasterCraft ProStar 190 was about 19’8” long, 91” wide, weighted about 2,600 lbs (two inches longer, six inches wider and about the same with as the fifth generation hull).

                        In 2001 the standard drive train was the (GM V-8) Vortec Predator 5.7 L EFI 310 hp engine (the most in its class) coupled with a 1:1 transmission. The (GM V8) Northstar ignition EFI 330 hp engine was offered as an option as was the 1.5:1 PowerSlot package.

                        Name:  3a553951901c908c524cddd18af32ea9.jpg
Views: 1
Size:  90.5 KB

                        The EVO® hull was designed to lower and soften the slalom wake with an entry of about 30 degrees which quickly flattens to run on parallel channels between side-vents and stepped chines. The 2001 ProStar 190 came equipped with the winged rudder reminiscent of the 1999-2000 models and introduced the Backstop Rope Deflection System (to prevent recoiling ski ropes from entering the boat) and parabolic tracking fins (to track straighter and minimize water distortion/bubbles).

                        The 2001 Waterski Magazine Boat Buyer’s Guide stated that, “The all-new 190, with its unmistakable, dramatic lines, stands out from the crowd both in an out of the course. With hard negative chines to increase lift and turning abilities and new parallel channels to reduce running surface and wake size, the new 190 EVO outperforms even the high standards previously set. The radically flared hull gives more interior room than before without increasing the running surface. The fuel tank has been shifted forward for better weight distribution. Even the least experienced driver will appreciate the rack-and-pinion steering, all-round ergonomic excellence and dazzling assortment of options. But the bottom line is the wake, which is what makes this boat the slalom icon it is.”

                        “Wakes are small and soft throughout all line lengths with the exception of a little bump at 22 off. Its strong hole-shot will allow even the biggest of skiers quick deep-water starts. Solid tracking and stellar wakes make the new 190 a slalom skiing machine”

                        The 2001 model carried a five piece wrap-around windshield (with a centre opening walk-through section for the first time). The interior of these boats also featured a rear seat which could be raised for form a 20 square foot sun pad.

                        Optional equipment in 2001 included speed control (PerfectPass – Cruise, Wakeboard Edition, or Digital Pro) fresh-water (closed) cooling, European package, heater, shower, Clarion AM/FM cassette stereo system, depth finder, cockpit cover, bimini (sun top), fibreglass platform, teak transom saver, transom ski tow eye, tower, board racks, extended pylon, single axle trailer, tandem trailer, galvanized trailer, and spare tire.

                        Exterior graphics on the 2001 ProStar 190 typically featured white deck, white lower hull. Two colour accent stripes (a thick band above and a thinner stripe below) ran the length of the hull about from the rub rail down to almost touch the waterline. The bottom edge of the two colours began higher at the bow and sweep down closer to the waterline by the time it reached the transom. A large “MasterCraft” decal was again featured on each side of the hull – this time it was chrome-like and was placed inside the larger colour accent stripe. Reverse gelcoat schemes were issued on special editions of this hull (Sammy Duvall or Team Tournament) in various years. By 2007 exterior gelcoat options included 21 colour choices which could be applied in different combinations to five different areas.

                        Name:  f98e46531d15bfe259cd6b4008791710.jpg
Views: 1
Size:  67.3 KB

                        In 2002, MasterCraft introduced the 197 – an open bowed tournament ski boat based on the Evo 190 hull. The new 197 wins Powerboat’s “Outstanding Towboat Performance
                        Award.” For 2002, MasterCraft also introduces the 197 Tournament Team (TT) boats which feature a slightly different hull design - a hook was added behind the rudder where the hull met the transom. The hook served to level the boat while under way, softening the wake and improving tracking. The winged rudder was also discontinued on the 2002 190/197 TT boats.

                        In 2002 MasterCraft introduces two new engine options - the MasterCraft exclusive Cadillac LQ9 (HO 6.0 L) EFI 385 hp engine and the L18 (HO 8.1 L) EFI 425 hp engine. With this new engine (LQ9) the ProStar 190 EVO and ProStar 197 become the first (and only) boat in history to be AWSA certified in all five (5) competitive water ski events - trick, slalom, jump,
                        barefoot and ski-fly.

                        2002 was also the first year that MasterCraft offered two transmission options on the ProStar 190/197 – the 1.5:1 and the new 1.23:1 (which was referenced in later years as a 1.26:1) as part of PowerSlot packages.

                        For 2003, both the 190 and 197 production models would adopt the hooked hull design from the 2002 Tournament Team hull design. It should be noted that introduction of the hook increased the wetted running surface of the hull (which may have decreased the top speed and decreased fuel mileage slightly). This design has remained unchanged through the 2008 model year. Beneath the water line, the only major difference has been the addition of a more rounded rudder in the 2006 model year.

                        In 2003 MasterCraft introduced the new 350 HP MCX Engine.

                        In 2005 MasterCraft introduced throttle by wire on the MCX Engine (to improve engine response).

                        Example pictures of 2007, 2008 and 2009 models can be viewed by clicking on either year.

                        In 2009 MasterCraft offered a Diesel-Volkswagen Turbo Charged Direct Injection (TDS) V8–225hp engine in combination with a 1.5:1 transmission as a option.

                        Name:  6e7d276d0de17ee4cfe1b6f476a254ee.jpg
Views: 1
Size:  58.7 KB

                        This hull was approved as a tournament tow boat by the American Water Ski Association (AWSA) from 2001 to 2009 as the ProStar 190 (as a closed bow boat) and from 2002 to 2009 as the ProStar 197 (as an open bow boat).

                        The 2001 to 2009 Evo hull has pulled more world record performances in slalom, jump and trick ski than any other hull, including:
                        • Women’s World Trick Record of 12,220 points (Nicolas le Forestier in 2001)
                        • three new Pro Tour records (2002)
                        • Men’s World Barefoot Record (Keith St. Onge in 2002)
                        • Men’s World Records in Slalom, Trick and Jump - the World Record Triactor (2003)
                        • Men’s Slalom World Record (Chris Parrish – 1 ½ @ 43 off) and Men’s Jump to regain the World Record Triactor - Slalom, Trick and Jump (2006)
                        • Men’s World Jump Record (243 feet by Freddy Krugger in 2007)

                        The ProStar Evo hull (2001 to present) was viewed by some as having a “softer” slalom wake then its immediate predecessors and an equally strong wakeboard performer when compared to the 1995-1997 hull.
                        Last edited by C36; 04-16-2009, 08:05 PM. Reason: 2009 Diesel engine option added.
                        MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
                        Over 70 different decals to choose from!

                        Comment


                        • #13
                          Sources:

                          MasterCraft: Setting a Higher Standard for 40 Years (40th anniversary book)

                          1981 MasterCraft Advertisement, “Engineering Excellence” ad
                          1983 MasterCraft Advertisement, “The Finest Construction Comes First…” ad
                          1991 MasterCraft Advertisement, “Can the New ProStar Improve on…” ad

                          1981 MasterCraft Owners Manual
                          1984 MasterCraft Owners Manual
                          1987 MasterCraft Owners Manual
                          1988 MasterCraft Owners Manual
                          1989 MasterCraft Owners Manual
                          1992 MasterCraft Owners Manual

                          1988 MasterCraft sales brochure
                          1993 MasterCraft sales brochure
                          1997 MasterCraft sales brochure
                          1998 MasterCraft sales brochure
                          1999 MasterCraft sales brochure
                          2002 MasterCraft sales brochure
                          2006 MasterCraft sales brochure
                          2007 MasterCraft sales brochure
                          2009 MasterCraft sales brochure

                          1980 World Waterskiing – [351/PowerSlot] Test and Analysis
                          1982 Spray Magazine – Waterski Tow Boat Test
                          1983 Spray Magazine – Waterski Tow Boat Test
                          1983 Powerboat Magazine – “MasterCraft PowerSlot Performance Report”

                          1991 Water Ski Magazine – Boat Buyer’s Guide
                          1993 Water Ski Magazine – Boat Buyer’s Guide
                          1996 Water Ski Magazine – Boat Buyer’s Guide
                          1998 Water Ski Magazine – Boat Buyer’s Guide
                          1999 Water Ski Magazine – Boat Buyer’s Guide
                          2000 Water Ski Magazine – Boat Buyer’s Guide
                          2001 Water Ski Magazine – Boat Buyer’s Guide
                          2003 Water Ski Magazine – Boat Buyer’s Guide
                          2004 Water Ski Magazine – Boat Buyer’s Guide
                          2006 Water Ski Magazine – Boat Buyer’s Guide
                          2007 Water Ski Magazine – Boat Buyer’s Guide

                          www.6ballsports.com
                          www.answers.com
                          www.iboats.com
                          www.mastercraft.com
                          www.nadaguides.com
                          www.tmcowners.com
                          www.usawaterski.org
                          http://www.waterskis.com/MasterCraft...ions-s/118.htm
                          www.waterskimag.com

                          /edit (15 Apr 2009) = 1980 World Waterskiing – [351/PowerSlot] Test and Analysis added
                          Last edited by C36; 04-15-2009, 07:27 PM.
                          MasterCraft /MariStar OEM Decals (1989 to 2001) for various models.
                          Over 70 different decals to choose from!

                          Comment


                          • #14
                            Very, very nice job!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
                            Charter Member Number 1

                            Quote: 2RLAKE,
                            At some point in time people need to wake up, remove their cranial intrusion into their own rectal areas, and take responsibility for their own actions.




                            Comment


                            • #15
                              Great post C36, I always enjoy them!
                              If you don't fall, you're not trying hard enough.

                              Comment

                              Working...
                              X