Announcement

Collapse
No announcement yet.

Changing impeller

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Changing impeller

    Hello, I need to change the impeller on my 1996 mastercraft pro star 190. On the front cover it reads," Indmar 68-5001." I want to know which impeller I should use to replace the one in this pump. Is there a cross reference chart so that I can match it up with? Any help will be greatly appreciated.

    Thanks.

  • #2
    Johnson 812 B
    Keep skiing!!!

    Comment


    • #3
      http://www.amazon.com/gp/offer-listi...&condition=new

      Comment


      • #4
        Well,that's the cheapest i've seen !!!
        Even available on Amazon Canada!!!
        Keep skiing!!!

        Comment


        • #5
          Some of the post I been reading online say that the Johnson 812b doesn't fit. Did you ever replace an impeller in the indmar 68-5001? I looked everywhere for a cross reference chart but can't find one for indmar 68-5001.

          Comment


          • #6
            Cross reference here ==> http://www.marinepartssource.com/new...no=10-24805-01

            The 812B is the correct impeller (or equivalent) as stated above by a TT member. Click on the accessories tab in the link and see that the 812 crosses to the 68-5001. I have installed the 812B in the 68-5001 part.

            You can also buy it here ==> www.skidim.com and they too will call the 812 OEM for that application. Read closely. It's there.

            I will say this: the bearings in the pumps go out sooner or later. I chose to replace the entire pump assembly after I discovered this after observing a small leak on a 93 Indmar R/W pump / low hour engine. Take it for what it is worth....

            .
            Attached Files
            93 190
            .
            Don't be a boot licker
            .

            Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8

            sigpic

            ..Some of you give a whole new meaning to the phrase "another @sshole with a Mastercraft."

            RE: Thrall, Welcome to the club....
            NEW SKINS in TN... Leading Edge Marine Interior

            feedback on a TN company: http://www.mastercraft.com/teamtalk/...ad.php?t=58767

            .

            Comment


            • #7
              The vast majority of Indmar and PCM engines from the last 20+ years take the same Johnson 812 impeller.

              Comment


              • #8
                Ok, thanks a lot guys, this site great help. Thanks again.

                Comment


                • #9
                  Originally posted by Gmoney View Post
                  Ok, thanks a lot guys, this site great help. Thanks again.
                  OK for this time but don't ever doubt us again!
                  Welcome to Team Talk!
                  Keep skiing!!!

                  Comment

                  Working...
                  X