Announcement

Collapse
No announcement yet.

ballast switches

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • ballast switches

    I picked up a pair of switches from wakemakers and note there are 6 leads but ultimately only two go in and 2 should come out. Anyone know why 6 leads and - if so - how to wire? On a related note i have eliminated my hydrolic hatch ( 2000 205v ) and am thinking that wiring harness ( which ends in two leads ) can probably be used as well. Has this been tried?
    Last edited by sheckski; 06-15-2012, 11:38 AM.

  • #2
    I'm pretty sure mine are hooked up like this.

    Comment


    • #3
      Maybe it will work this time
      Attached Files

      Comment


      • #4
        meaning how? Do you know what the wiring plan is?
        Thanks

        Comment


        • #5
          Do you have the aerators or the reversables? They each have a different configuration. I know aerators were the standard back then just not sire of you upgraded
          CURRENT: 2008 SANTE 210

          2000 Mastercraft Xstar
          2004,2005 Ski Centurion Avalanche C4
          2003, Ski Centurion Cyclone
          99,2000,2001, 2002 Ski Centurion Elite V/Hurricane/lightning
          88 2001 Nautique

          Comment


          • #6
            That diagram I posted is for reversible pumps. I assumed you had reversible when you said 2 going in and 2 going out.

            Aerator pumps would just be one pump connected to A and D and the other connected to F and C with Vs and ground in the same place.

            Comment


            • #7
              I am using jabsco reversible puppies. Thanks for that diagram. If i understand correctly I am jumping C and D , A and F .

              Thanks again

              Comment


              • #8
                wiring diagram from wakemakers. I guess it is actually a 7 terminal switch. in any case, for the next guy.....
                Attached Files

                Comment


                • #9
                  7 terminal is functionally the same as 6, it just has a light

                  Comment


                  • #10
                    my plan is to pre jump 5+7 , 1+6, 3+4 and then just wire the remaining once in the boat.

                    Comment

                    Working...
                    X