If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I plan on having 4 1200's, one for each 750 in the rear lockers, one to replace the existing KGB pump, and one for the integrated bow bag. Initially i was thinking i would build a manifold and put two 1.5" intakes to avoid drilling 4 holes in the boat, but now i'm thinking it will be more cost effective to drill the 4 holes and use a 1" thru hull for each pump.