Announcement

Collapse
No announcement yet.

Altering Bimini to fit under my tower

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Altering Bimini to fit under my tower

    I want to change the front Bimini poles so that I can raise and lower the Bimini without having to unscrew the front poles.

    Right now the front crossbar will not fit under the speakers.

    I am looking for either a pole in a pole system or maybe some sort of hing that I can install on the pole so that I can lower or break them when raising the bimini.

    Any ideas?

    [IMG] 2011-05-15 12.29.48 by FST ASLP, on Flickr[/IMG]
    1999 Maristar 230 VRS

  • #2
    What about something like this.
    http://www.overtons.com/modperl/prod...5&merchID=4006

    I know they are the support poles at the back, but maybe you could get some kind of coupler and cut the existing poles. You could then loosen adjustment screw and lower the bar just enough to get under the speakers.

    Comment


    • #3
      Maybe retrofit your front poles to be adjustable like these?

      http://www.amazon.com/Taylor-Product.../dp/B0006ZBPX0

      Comment


      • #4
        Are the rear poles adjustable? If so, what about turning the top around?

        Comment


        • #5
          I'd think you could just shorten each pole and adjust everything to your liking. All the hardware is easily adjustable and removable with a allen screw. Start cutting small pieces off until you are happy.


          JerseyDave's 230 had a tower bimini that attached directly to the tower. Maybe you can rig something like this. I actually think this is OEM.

          -Cameron
          2007 ProStar 197
          1996 ProStar 190

          Comment


          • #6
            I need to do this. It would make it a lot easier to do a custom cargo rack then.

            Comment

            Working...
            X