Announcement

Collapse
No announcement yet.

2006 X2 Seat Missing!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2006 X2 Seat Missing!

    Dang it, put my boat back together after pulling it apart from winterizing to find out the seat behind the driver seat is missing! The only thing I can think of is it must have flown out when I didn't put all the seats back in place because I was only driving 2 miles down the road at 30-40 mph 3 weeks ago (to get a little gas in my dry tank so that I could stable it)? Did try backtracking my drive and didn't come up with anything.

    Found I have 2 options:
    1. Order a "skin" from Mastercraft for $180, need to still find a quote on what it would take to build? I do know of local MN guy I'll ask and probably another shop to compare.

    2. Called Jim "The Upholstery Guy" in TN from a previous post on here. Sounds like a great guy and he said he can do the whole thing for $150!

    Of course I'd like to get as close to an exact match. I'll attach a picture.

    Wondering if someone with a 2006 X2 measure and take pictures of top and bottom of their seat for me? I guessing there is a plastic bar or 2 to keep it in place, would like those measurements too. Thanks in advance!

    I'm open to all other ideas too?
    Attached Files

  • #2
    Did you call Midwest MC to find out what a replacement cost would be? I'm sure it's expensive but you just never know. It might save a lot of hassle.

    Comment


    • #3
      double E -
      were you right after doubleD in line all the time?

      that sucks! i would get a quote for a replacement as well. I know i've been on mattscraft's boat (2009 X2) after he's towed it to the ramp and that seat had become dislodged and was sitting on the floor of the boat... something you might want to lock down before trailering anywhere

      Comment


      • #4
        30-40mph doesn't seem fast enought o make it fly out, but that same seat in my X2 would try to lift off at hiway speeds.
        Put a strip of velcro along the front edge, works good (when you get a new seat).
        '06 X2 MCX

        "I understand why some people may not want to do this the way I have recommended but I can't understand the death grip some people have on a toilet plunger with a hose fitting." -JimN

        Comment


        • #5
          I agree, hassle free is many times worth paying for in the long run, especially knowing you'll get exactly what you want. In fact, I called Midwest first...but they don't make it any longer. They are also the ones quoting $180 for just the skin.

          I'm just nervous about not having a "model" to work from, but maybe I shouldn't be?

          Comment


          • #6
            Yup, mine flips out all the time but never came out of the boat I found that if you close the windshield and the billet door it stays put. I can measure my seat base for you if know body else chimes in.

            Comment


            • #7
              If you don't have the walk thru door, jsut the windshield closed won't cut it though. Mine would still work it's way out with the windshield closed.
              Isn't the X2 MC's best selling model for a while now? Lots of them out there, have you tried the salvage yards? I think the seats are the same size as the X15 too, what about the guy who's yellow X15 got washed up in the Sandy storm?

              Or a little midnight auto might get you one!
              '06 X2 MCX

              "I understand why some people may not want to do this the way I have recommended but I can't understand the death grip some people have on a toilet plunger with a hose fitting." -JimN

              Comment


              • #8
                Originally posted by Thrall View Post
                If you don't have the walk thru door, jsut the windshield closed won't cut it though. Mine would still work it's way out with the windshield closed.
                Isn't the X2 MC's best selling model for a while now? Lots of them out there, have you tried the salvage yards? I think the seats are the same size as the X15 too, what about the guy who's yellow X15 got washed up in the Sandy storm?

                Or a little midnight auto might get you one!
                True - '06 does not have the billet door??? The base is just the black plastic Roto-Plas??? Have not found a source for this, but sure it is on here somewhere. They did put a tether for the rear seats, not sure why not on that seat. (like the Velcro idea) I tried putting the driver seat all the way back, helped most times, but would still pop out, but never flew out of the boat, even after a 4 hour tow, always would find it sitting on the floor, until I figured out the closed door method.

                Comment


                • #9
                  I put heavy duty velcro on the bottom of the cushion and the frame it sits on and it solved the problem with the seat coming up during towing. Year 6 and no problems.
                  2006 Maristar 200VRS MCX
                  KGB Ballast and all the works!

                  Tow Veh: 2010 Toyota Tundra
                  Bike: 2007 HD Street Glide

                  Beer:Sam Adams Boston Lager/ Cherry Wheat, Petes

                  Strawberry Blonde, Petes Wicked Ale

                  Chief Petty Officer: "Results not excuses"

                  "You Can't Beat a Tree"

                  Comment


                  • #10
                    Never would have guessed an MC would make it to a salvage yard? Tried google, didn't get very far, but would love an existing seat to change the skin on. Is there some you'd recommend?

                    Love the velcro idea for when I do get a new and the others.

                    Comment


                    • #11
                      Made it the storage unit today. Had a 2009 seat that I thought for sure would fit & I could just recover it. But it was several inches shorter in my 2006!

                      Back to starting from scratch. Anyone have a 2006 X2 they could measure up the base on? Especially curious how far it hangs off the front edge? I also believe there was a hook on the back side, but others say there is not, can someone confirm or deny?

                      Comment

                      Working...
                      X