Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Electrical

Reply
 
Thread Tools Display Modes
  #171  
Old 01-14-2020, 12:17 AM
Tsumi Tsumi is offline
MC Fanatic
 
Join Date: Feb 2012
Boat: 2001 X-star 5.7L LTR, 2000 Prostar 190 5.7L LTR, both dark green
Location: Pacific
Posts: 928
1. Fuel sender: you don't need to run additional wires, but you will need to rewire what is back there. The boat harness will have purple, pink, and black. The sender harness will have red, white, and black. To hook it up to the new 2 wire sender, hook up the pink wire to the to the sending wire (black on WEMA units), and black to the grounding wire (pink on the WEMA units). You can do whatever you want with the purple wire, most likely tape it off. It is an ignition switched 12v source, so you can use it to power something.

2. It depends. Your year might be early enough that you don't need it, as there were several generations of the MMDC with some differences. Easiest way is to check your MMDC harness (the big plug) and see if you have tan, gray, light blue, and pink wires. If you do, you have everything needed to make the Faria gauges work. If not, you will need to do some extra wiring.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 06:18 PM.


2018