Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Electrical

Thread Tools Display Modes
Old 08-09-2019, 06:13 PM
JED JED is offline
TT Newbie
Join Date: Aug 2019
Boat: 2006 X-45
Location: Southeast
Posts: 3
Ď06 X-45. Analog gauges donít work.

Gone through the archives on this site regarding analog gauges not working. Just wanted to run some other ďsymptomsĒ before I bought the the MMDC.
Just bought the boat, the previous owner put a new starter solenoid on the boat, next time he took it out all the analog gauges didnít work. The displays on the perfect pass work. My guess, whom ever put on the solenoid didnít unhook battery and a spike or undervolt went thru the MMDC.
All fuses are okay.
All connections are clean and secure.

When you turn the key to ďonĒ, the perfect pass lights up, then all the analog gauge needles move back and forth, less then an 1/8 inch very rapidly for about 2 seconds then go dead.

The boat will start and run.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 05:17 PM.