Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Reply
 
Thread Tools Display Modes
  #11  
Old 10-09-2019, 10:35 PM
skymonkey skymonkey is offline
TT Regular
 
Join Date: Dec 2017
Boat: 2000 MariStar 210 VRS EFI
Location: Southcentral
Posts: 59
Had my computer checked and it had numerous overheat fault codes. Overheat causes the ECU to put the engine in limp mode. I started checking my temp gauge and found a sending connection off. Reconnected that and went for a test run. Sure enough.... she started to overheat, so I brought the throttle back and at idle or just above idle the temp stayed fine. So I ordered a circulation pump and a sea water pump. I inspected the sea water pump and it looked fine. (Only has maybe 10hrs on it) so I changed the circulation pump and did a test run. Ran great!


Sent from my iPhone using Tapatalk
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 03:24 AM.


2018