Surf Setup for NXT22?

[g-mantrix]

Just about to fit the 710’s into rear lockers NXT22
Has anyone not fitted the divider panel savers with the larger bags and haven’t had an issue?


Sent from my iPhone using Tapatalk

[waterskier360]

waterskier360 check your PMs. I have pictures of the divider panel supports I can send you now. I can't get the pics to post here.

Just did 2nd try


Sent from my iPhone using Tapatalk

[waterskier360]

Ordered the 710’s , braces and fittings on Black Friday deal , at times we only have 2 in the boat and one surfing . Keeping the 400’s to throw up front if I need them .

[g-mantrix]

Ordered the 710’s , braces and fittings on Black Friday deal , at times we only have 2 in the boat and one surfing . Keeping the 400’s to throw up front if I need them .

Maybe I should have bought the divider supports also
How do you plan to fill the 400’s?


Sent from my iPhone using Tapatalk

[Tookeymonster]

Just about to fit the 710’s into rear lockers NXT22
Has anyone not fitted the divider panel savers with the larger bags and haven’t had an issue?


Sent from my iPhone using Tapatalk

You need the panel savers! The stock bags you almost need them. I have them, also always check to make sure the panels are inserted correctly and locked in before filling. Trust me!

[John Johnson]

You need the panel savers! The stock bags you almost need them. I have them, also always check to make sure the panels are inserted correctly and locked in before filling. Trust me!

Tookey,

What did you find to be the best tab settings with the extra weight? Still struggling with consistency on regular/port side. I have 710s and 300 lbs. of lead under rear seats.

[John Johnson]

Just did 2nd try


Sent from my iPhone using Tapatalk

I think I got the pics to upload this time. Two shots. Compartment side and engine side.

[Tookeymonster]

Tookey,



What did you find to be the best tab settings with the extra weight? Still struggling with consistency on regular/port side. I have 710s and 300 lbs. of lead under rear seats.

Put that 300 lbd mid ship and add about 300 more if you have a small crew. Goofy side set up is 65 to 75% left tab and about 25-30% center tab. I have found with me being a big guy this has the most push from way back in the curl to the back of the boat. The wife is the only one that rides that other side. Lol surf left I usually just set it at 90% right tab and 5-10% center tab.

Sent from my SM-G960U using Tapatalk

[Tookeymonster]

Tookey,



What did you find to be the best tab settings with the extra weight? Still struggling with consistency on regular/port side. I have 710s and 300 lbs. of lead under rear seats.

Use the center tab to get the swim deck just out of the water. Some people think it subtracts ballast, it just moves the weight a little more forward.

Sent from my SM-G960U using Tapatalk

[waterskier360]

Maybe I should have bought the divider supports also
How do you plan to fill the 400’s?


Sent from my iPhone using Tapatalk

No idea


Sent from my iPhone using Tapatalk

[waterskier360]

I think I got the pics to upload this time. Two shots. Compartment side and engine side.

Thanks , doesn’t look difficult.


Sent from my iPhone using Tapatalk

[g-mantrix]

No idea


Sent from my iPhone using Tapatalk

Haha good plan
When you work it out or if I do let’s share


Sent from my iPhone using Tapatalk

[waterskier360]

Wakemakers has some pics now of the engine divider braces. Just received mine in .
Too bad the boat is in storage, going to have to be Spring project.

https://www.wakemakers.com/engine-divider-panel-saver.html

[g-mantrix]

Surf Setup for NXT22?

So being fortunate to be in Aus and in our summer, and buying the 710’s from wakemakers on their Black Friday sale in time for boating season, I can say it’s made a huge difference to the surf wave
So my ballast set up is std plus surf ballast front and 710’s rear plus some lead bags mid way, about 100kgs total, plan to add more
Surf left side mainly
RH side tab 85
Ctr tab 15
LH tab 10
5-6 peeps
Was able to surf at least 2mtrs further back than when had the 400’s rear, I reckon surfing about 5mtrs back
Board Slingshot butter bar
So Happy I made the switch to the bigger bags and will continue to play with settings to see if I can get it any better
I’m running ACME 2241 and prefer to not change prop with lesser pitch
Cheers


Sent from my iPhone using Tapatalk

[hyman989]

So being fortunate to be in Aus and in our summer, and buying the 710’s from wakemakers on their Black Friday sale in time for boating season, I can say it’s made a huge difference to the surf wave
So my ballast set up is std plus surf ballast front and 710’s rear plus some lead bags mid way, about 100kgs total, plan to add more
Surf left side mainly
RH side tab 85
Ctr tab 15
LH tab 10
5-6 peeps
Was able to surf at least 2mtrs further back than when had the 400’s rear, I reckon surfing about 5mtrs back
Board Slingshot butter bar
So Happy I made the switch to the bigger bags and will continue to play with settings to see if I can get it any better
I’m running ACME 2241 and prefer to not change prop with lesser pitch
Cheers


Sent from my iPhone using Tapatalk

If you want to make it even bigger get some lead bags and it will change a ton

Sent from my SM-G975U using Tapatalk