Announcement

Collapse
No announcement yet.

X9 with stiff throttle

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • X9 with stiff throttle

    I have an 06’ X9 with drive by wire. The throttle is terribly stiff. Its not the tension set screw, it’s only stiff in gear. If I give it throttle in neutral with shifter disengaged there is zero tension. Help please

  • #2
    Sounds like you need to replace the shift cable.
    -----------------------------------
    Mastercraft ProStar 2019 5.7L - Current
    Mastercraft X25 2014 6.2L - Current
    Nautique 200 OB 2012 5.7L - Current

    Comment


    • #3
      Hmm would that give me problems throughout the rpm range ? Its not stiff at shift, half throttle is the worst.

      Comment


      • #4
        Disconnect the throttle cable behind the armrest and see if it smooth. If not replace the throttle you can buy the non electronic version and move your Pedal position sensor over to the new one to save some bucks. I did this last year. Takes about 30 minutes to swap the parts

        Comment

        Working...
        X