X-14/X-14v owners & enthusiasts thread

[Double D]

I lost the lens cap for light on the ZFT3 tower yesterday. It is a round dome, Where do I find a replacement ? I searched a couple of web sites with no luck.

I have not searched for a little while. The only one I ever found was from a Chinese web site and I never got it, and had to have the credit card company get my money back.

Let us know if you find something.

[mike koen]

I lost the lens cap for light on the ZFT3 tower yesterday. It is a round dome, Where do I find a replacement ? I searched a couple of web sites with no luck.

[MCVOLS]

Is the non goofy side surfable as well? Did you raise the platform at all? What board are the bigger folks using? Thanks for the info

We surf both sides, same set-up. Haven’t modified the platform, but have considered raising or trimming the corners to clean it up, but can’t make myself do it.

We use a older Ronix Marshmallow, actually have two, 4’6” & 5’2” I think. The larger one is used for big guys and adult/teen beginners.

also have a couple skim boards but you gotta be pretty good to keep them going.

[peytonvp]

here is where we attach our shaper. We have better push here than behind bullseye, but do take some spray in the boat sometimes. 1st Pic is in driveway tonight, wake an son surfing is from earlier today with same location. Factory ballast all full, 600 bag behind motor box, 450 in walkway. 4 in boat for pic, 3 while surfing, driver and other two in back corner. Better with a couple more bodies. Obviously not as big as wake specific boats, but we also were able to run the course earlier in the morning before adding all the weight.

I would love to have an x24 to surf and a prostar to ski, but that’s not in the budget, so we make this work!

Is the non goofy side surfable as well? Did you raise the platform at all? What board are the bigger folks using? Thanks for the info

[MCVOLS]

here is where we attach our shaper. We have better push here than behind bullseye, but do take some spray in the boat sometimes. 1st Pic is in driveway tonight, wake an son surfing is from earlier today with same location. Factory ballast all full, 600 bag behind motor box, 450 in walkway. 4 in boat for pic, 3 while surfing, driver and other two in back corner. Better with a couple more bodies. Obviously not as big as wake specific boats, but we also were able to run the course earlier in the morning before adding all the weight.

I would love to have an x24 to surf and a prostar to ski, but that’s not in the budget, so we make this work!

[Doc Haze]

I used the exact same lights and they are fantastic! WAY brighter then the halogens. Only a little bit of tweaking to mount them to the plate but nothing basic tools can’t handle. They fit with only a tiny gap between them and the housing. And recessed perfectly. Hardest part is pulling the speaker out to get to them. They take an odd Allen wrench size for the speaker housing bolts. A couple hours of work and you’ll be pulling more bugs out of your teeth then you could imagine.

[Double D]

LED ? Tell me plz

Pull the old lamp, separate from the plate, flip the plate 180, drill a couple holes, mount and install.

Lightronic 3.5" Round Compact 18W 6000K Nature White Super Bright 10° Long-Range Illumination Spot Beam LED Off Road Fog & Driving Light/Pods Light, IP69 Waterproof Rating, 2 Pieces https://a.co/d/dDU1YQi

[Double D]

You surf with the x14 ? The young Lads have been asking if we could .

Not really, no.

[mike koen]

Here are two. Fits under the line.

You surf with the x14 ? The young Lads have been asking if we could .

[mike koen]

Glove Box gas shock should be like this one ... Amazon.com : attwood Lift Gas Spring Extended Length: 7.5", Standard Output Force: 10 lbs, Size: 0.65" H x 0.65" W x 7.75" D : Boating Tools : Sports & Outdoors

Found it on Amazon Amazon.com : attwood Lift Gas Spring Extended Length: 7.5", Standard Output Force: 10 lbs, Size: 0.65" H x 0.65" W x 7.75" D : Boating Tools : Sports & Outdoors

Thankyou . I ordered one .

[mike koen]

Could change them to LED

LED ? Tell me plz

[MCVOLS]

You have a picture of where that is?

I’ll get one this weekend and post it, and one of the wave too if I can

[peytonvp]

Picked up the LF Wakesurf edge this year. Had been using a home made one for years (got plans here on TT), and it finally broke. Wife and adult kids could surf all day, but my 200lbs couldn’t never get enough push. Now I can with the edge. We found the most push by mounting just behind the “x series” plate forward of the bullseye.

You have a picture of where that is?

[MCVOLS]

anyone find a good wake shaper for the x14

Picked up the LF Wakesurf edge this year. Had been using a home made one for years (got plans here on TT), and it finally broke. Wife and adult kids could surf all day, but my 200lbs couldn’t never get enough push. Now I can with the edge. We found the most push by mounting just behind the “x series” plate forward of the bullseye.

[Double D]

Do not want to ask for too much but do you happen to have a picture of the wake/wave with one on an x14?

Sorry sir, I do not.