Announcement

Collapse
No announcement yet.

X-14/X-14v owners & enthusiasts thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • zsqure
    replied
    Originally posted by sully View Post
    I dropped off our boat to get some trailer maintenance done, It sat at the repair shop a couple days outside with the cover on, but it rained a couple days. Get the boat back and the glove box is half full water. Has anyone else had that same experience with the glove box filling water?
    I have had mine fill with water a couple times, a heavy overnight rain while sitting outside with a worn-out cover. Can't remember if there is a drain in it or not. Now I use a few 1 gallon zip lock bags to keep the stuff in. there is a gasket, but, like the cover it was not doing its job. Last time it sat out in the rain with a (new) cover on everything was dry inside the boat.

    Leave a comment:


  • Double D
    replied
    Originally posted by mike koen View Post
    I am looking for a wiring schematic for ballast system for my 2008 x14.The starboard tank always reads empty on the VDIG. There is power and ground at sensor and signal coming out of tank sensor but I don't know where it goes from there.Thanks in advance.
    Might be able to help on the schematic. Also, if you need a replacement sensor, I have 3. Checking...

    Leave a comment:


  • mike koen
    replied
    I am looking for a wiring schematic for ballast system for my 2008 x14.The starboard tank always reads empty on the VDIG. There is power and ground at sensor and signal coming out of tank sensor but I don't know where it goes from there.Thanks in advance.

    Leave a comment:


  • sully
    replied
    So I checked for a drain tonight, no drain. Seems like it would be easy to add one though.
    thanks!

    Leave a comment:


  • BrianS
    replied
    That is really strange. The glove box is so far under the windshield I can't imagine it getting wet even if it was open. I believe mine has a drain hole in the bottom as well, is yours blocked some way?

    Leave a comment:


  • sully
    replied
    Originally posted by 93Prostar190 View Post

    No sir, I am guessing they must have left the glove box open for some reason and the rain got in ... never had water in mine with it closed.
    The things is they had no reason to be in boat, it was trailer work being done. They would have had to leave the cover off and leave the glove box open.
    maybe because our cover is cockpit cover it gets thru the cover or under the windshield…
    I’ll check the seal around the glove box. It’s just strange though

    Leave a comment:


  • 93Prostar190
    replied
    Originally posted by sully View Post
    I dropped off our boat to get some trailer maintenance done, It sat at the repair shop a couple days outside with the cover on, but it rained a couple days. Get the boat back and the glove box is half full water. Has anyone else had that same experience with the glove box filling water?
    No sir, I am guessing they must have left the glove box open for some reason and the rain got in ... never had water in mine with it closed.

    Leave a comment:


  • sully
    replied
    I dropped off our boat to get some trailer maintenance done, It sat at the repair shop a couple days outside with the cover on, but it rained a couple days. Get the boat back and the glove box is half full water. Has anyone else had that same experience with the glove box filling water?

    Leave a comment:


  • mike koen
    replied
    Originally posted by sully View Post
    is this what your looking for?
    The lens I need has external threads. That lens has 1/4 turn tabs on the inside. I might get that one yet, modify and silicon in place but I,m not sure it is tall enough to clear the bulb. Also looking at upgrading to led replacement assembly. There is a few options , I need to find what fits the tower pylon for a clean look.

    Leave a comment:


  • sully
    replied
    is this what your looking for?
    Navigation Light Lens Cap from Midwest MasterCraft your MasterCraft Boat Parts Headquarters.

    Leave a comment:


  • Double D
    replied
    Originally posted by mike koen View Post

    Did you loose the lens also ?
    mike koen I did not lose mine. Its cloudy and not clear anymore.

    Leave a comment:


  • mike koen
    replied
    Originally posted by Double D View Post

    I have not searched for a little while. The only one I ever found was from a Chinese web site and I never got it, and had to have the credit card company get my money back.

    Let us know if you find something.
    Did you loose the lens also ?

    Leave a comment:


  • mike koen
    replied
    Originally posted by Krw1225 View Post

    I’d try calling Bruce at Action water sports, he’s helped me out a lot.

    Bruce Jesionowski
    Parts & Warranty
    810-629-1342
    Thanks , I emailed them.

    Leave a comment:


  • mike koen
    replied
    MCPARTS depot tells me the 401707 light is what I need . Has anyone else looked at that replacement? It doesn't appear to me that it is correct.

    Leave a comment:


  • Krw1225
    replied
    Originally posted by mike koen View Post
    I lost the lens cap for light on the ZFT3 tower yesterday. It is a round dome, Where do I find a replacement ? I searched a couple of web sites with no luck.
    I’d try calling Bruce at Action water sports, he’s helped me out a lot.

    Bruce Jesionowski
    Parts & Warranty
    810-629-1342

    Leave a comment:

Working...
X