Announcement

Collapse
No announcement yet.

NXT22 Wakeboard Ballast Setup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • monsterwake
    replied
    This is what working.
    Wakeboard
    Full everything stock wPnP
    550# lead - 150 in front - 200 under each bag in lockers
    400# sack in front walkway
    Plumbed 260# sacks under seats
    I had to add a tsunami to each of these bags to empty. They fill but do not empty.
    Takes about 9 seconds to plane out with the use of the center plate.
    Slowed down to 22.2 and at 70 foot.

    Surf
    Just empty the 400# sack or move it to the back
    Then empty some front ballast as needed

    Leave a comment:


  • MI_Corey
    replied
    Check out Cowakes on instagram. They seem to have their NXT22 figured out.

    Leave a comment:


  • monsterwake
    replied
    Ended up putting the 400# sack in the back floor up against the seat. 150 lead in front and 200 lead in each side just in front of batteries and hard tank.
    I don't have the sacks for under the seats yet. I have found people talking about needing centered weight instead of weight in nose and rear. I will be moving everything around to find the cleanest setup.
    I am probably going to have to just put a sack in the floor.

    I think I have asked but has anybody removed the hard tanks and put in custom bags or 1100's?

    Leave a comment:


  • monsterwake
    replied
    This has not happened yet. Just a plan. I will post the results.

    Leave a comment:


  • MrDearybury
    replied
    Originally posted by monsterwake View Post
    This is what I will be trying.
    Wakeboard
    Full everything stock wPnP
    500# lead - not sure where in the boat yet
    400# sack in front walkway
    Possibly going to add 260# sacks under seats

    Surf
    I will just empty the 400# sack or move it to the back
    Then empty some front ballast as needed

    I am thinking of adding the 155# sacs under the front seats on the overflow of the front ballast.
    Has anybody done that yet?

    do you have that sucker propped, how long did it take to plane out and such. Impressive

    Leave a comment:


  • MC25
    replied
    Stock ballast, plus 500 in lead in the rear combined with the plug and play, and a few people
    Attached Files

    Leave a comment:


  • monsterwake
    replied
    This is what I will be trying.
    Wakeboard
    Full everything stock wPnP
    500# lead - not sure where in the boat yet
    400# sack in front walkway
    Possibly going to add 260# sacks under seats

    Surf
    I will just empty the 400# sack or move it to the back
    Then empty some front ballast as needed

    I am thinking of adding the 155# sacs under the front seats on the overflow of the front ballast.
    Has anybody done that yet?

    Leave a comment:


  • monsterwake
    replied
    Thanks Shaun.

    Leave a comment:


  • Shaun R
    replied
    This post should help. http://www.mastercraft.com/teamtalk/...ad.php?t=72753

    Leave a comment:


  • monsterwake
    started a topic NXT22 Wakeboard Ballast Setup

    NXT22 Wakeboard Ballast Setup

    Those with the NXT22 that wakeboard, what is the best ballast weight setup? I am trying to keep from putting bags on the floor or in the seat.
    I ride 75' at 23mph.
    The 2017 NXT22 has 870 total in each locker and 400 up front. I have read that you need a lot more weight up front but is that with the rear full or just the hard tanks full?
    Any info on this is much appreciated and I am sorry if there is already a thread that I could not find.
Working...
X
😀
🥰
🤢
😎
😡
👍
👎