2012 BIG Firware Update

[ddanenberger]

This time they disconnected the paddle wheel . Seems better but lost all quick list settings. Still having issues

[AZX46OD]

So, did MC test any of this before launching the product? Or are they using us who have paid out the nose for these boats as their test fleet? These boats should be great in a few years once the bugs are worked out. Mine goes back in to the shop tomorrow...

[Stefan]

So, did MC test any of this before launching the product? Or are they using us who have paid out the nose for these boats as their test fleet? These boats should be great in a few years once the bugs are worked out. Mine goes back in to the shop tomorrow...

I've been thinking about that for a while now... if they'd asked me I'd gone to Tennessee or Florida for a week to test it thoughly for them...

[Stefan]

Switched the GDIG at the dealership today, and in a first brief test suddenly all my problems are gone! My cruise works nearly perfect, my surftabs extend all the way to 100% and stay there, and my speedo works like it should. A BIG THANKS to everyone involved :-) now we'll just have to wait for a BIG update to fix the issues there...
btw. the most recent GDIG Firmware the new boats get seems to be V0.23

sorry it I post this in every concerning thread

[Jibber]

Switched the GDIG at the dealership today, and in a first brief test suddenly all my problems are gone! My cruise works nearly perfect, my surftabs extend all the way to 100% and stay there, and my speedo works like it should. A BIG THANKS to everyone involved :-) now we'll just have to wait for a BIG update to fix the issues there...
btw. the most recent GDIG Firmware the new boats get seems to be V0.23

sorry it I post this in every concerning thread

Glad to hear that your problems gone! Hopfully the update will be fix mine ballast Problem

[Stefan]

I found out today that what I posted earlier http://www.youtube.com/watch?v=S9v7JN4HO4A doesn't happen when I switch my BIG to english units, seems to happen only with metric units...

[Stefan]

After having a working cruise for one weekend everything went back to the aweful way it was before. My cruise only works once and only when activated between 1000 and 2500 rpm and my speedo shows way to much, about 1.5 to 2 times...

btw mastercraft GB now says the GDIG's can't be updated to v0.22, the dealer has to put in a new one

[Jibber]

I can´t believe! A manual is online for the 2012 Madallion Gdig System on Mastercraft/knowlegecenter/owners manual!

[Jonb1822]

Does anyone have an issue with the BIG display is flashing a green line randomly?

[joaquinbarroso]

I know this is a very old post, but asking for your help here, do any of you have the file to update my boat? X25 2012, thabks in advance.

[izzman7]

I am looking at several 2012 X45 and X55 boats, but don't want to purchase one if this issue hasn't been corrected. I just sold my older X45 that had the piggyback ballast and would want to be able to do the same on any new boat I bought.

Is there manual switches on these boats that I can just flip until the ballast overflows out the side when full, and can I just flip the manual switch until it stops spitting out the side when emptying? Unfortunately based on my location I haven't been able to actual get in one of these boats to try this stuff out. I will have to drive a long way to purchase one but don't want to pursue any 2012's if this is still an issue, and I can't just use manual switches like my old boat.