Ballast timers that ACTUALLY WORK!

[Justin D.]

PM Send

[bet_on_black]

This was such a great upgrade to my 07 last year. Thanks again and glad to see others getting this done as well.

[tr6coug]

This was such a great upgrade to my 07 last year. Thanks again and glad to see others getting this done as well.

You're welcome! Trying to make the MC universe a better place one ballast timer at a time

[osmonet]

Thanks for turning my timers around so quickly. What a great experience!!!

Looking forward to filling with one flip of a switch this summer.


Sent from my iPhone using Tapatalk

[eecyclone]

I'm going to be sending you my timers later this month! Fed up with the stock timers. Is the best way to do it through your website or here?

[customcruiser]

sooooooooooo much better!!!!!!

I am very happy with this

[trunderw]

I'll second that. It was a major pain in the ***

Any advice for removing this from the x14? In mine it's under the driver's console accessible from the front seat I think. It looks annoying but really want this fixed...

[BrianS]

Any advice for removing this from the x14? In mine it's under the driver's console accessible from the front seat I think. It looks annoying but really want this fixed...

The only advice I have is good luck! Take the four screws out of each corner of the box. Then you have to find a way to turn it upside down to remove the red and black power wires. If you have a heater, those hoses and a bunch of other stuff will be in the way.

Then you'll need to cut the 3 pairs of orange and blue wires for each pump. There is very little slack. You'll want to label them on both sides so you can get them back together right.

Putting it back in is the reverse. I put disconnects on the orange and blue pump wires in case I ever need to pull it back out. Have fun crimping those on one handed! The only access for that is from under the steering wheel.

[FoggyNogginz]

Guys - Apologies for not reviewing this entire thread. What do I have to do to bypass the ballast timers on my 2012 with the Medallion system so that I can remove my hard tanks and install bags? Do I have this option with this model year?? Many thanks on advance.

[Many shots]

I just sent mine out to tr6coug and they work great! Very fast turnaround time and great service. Would highly recommend his services.

[Stritt]

Sent a PM to see if you are still programming.

[tr6coug]

Yup. I'm still fixing timers! Just sent 3 out this week.

[neil.anderson63]

Just had mine done by tr6coug for my 07 X2. Quick turn time and very affordable. Highly recommend. Thanks Erik!

[Swaggywaggy]

I have a 09 x star im fixing to install the 2 910 poung fatsacs in rear lockers useing theoverflow to fill and empty should i try and do the timer reprogram myself like wakemakers suggest or should i skip all that and send to this guy to make it right?

[tr6coug]

Just had mine done by tr6coug for my 07 X2. Quick turn time and very affordable. Highly recommend. Thanks Erik!

You're welcome! Glad I could help.