Ballast timers 08 x45

[cwarndahl]

Hi all
I'm told that I should have 20 minute timers. Wondering if there is a way to tell? I found the box on the port side locker. It was covered with 3 breakers. I'm gonna get mor in depth tommorow. But before I disconnect pumps and start to program I just want to see if there is a way to tell ahead of time.

[tr6coug]

6 minute timers have "version 1.1" on the label. 20 minute timers have "Revision 4.0" on the label.

The only difference between the 6 minute and 20 minute timers is the timer's firmware. Electronically they are identical. Both are notoriously unreliable.

If you are having problems with them such as running for a short time then turning off or filling but not emptying then I can fix them with a firmware update. Lots of info here:

http://www.mastercraft.com/teamtalk/...ad.php?t=50038

[cwarndahl]

6 minute timers have "version 1.1" on the label. 20 minute timers have "Revision 4.0" on the label.



The only difference between the 6 minute and 20 minute timers is the timer's firmware. Electronically they are identical. Both are notoriously unreliable.



If you are having problems with them such as running for a short time then turning off or filling but not emptying then I can fix them with a firmware update. Lots of info here:



http://www.mastercraft.com/teamtalk/...ad.php?t=50038

This was going to me pre try this before I call you to program then right. Just want to get through the season. Then send them to you lol.