Sizzler has had a lot of fuel pump trouble and created this thread. Read it, and consider sending him a PM. It might represent a simpler solution for you.
Announcement
Collapse
No announcement yet.
Fuel pump aftermarket part numbers
Collapse
X
-
Originally posted by rudaire View PostHas anyone tried to order this stuff??
We manufacture FEP Corrugated tubing and PFA Ultra Pure Corrugated tubing
Seems we could order the 1/4 inch and warm/stretch it over the 5/16 end. I haven't measured the tubing in my X-star, but seems this company could provide a replacement.
Also, I talked to a supply company in my city that swears it is no problem to source either a smooth or corrugated replacement, but I'd have to order bulk, which I've considered doing and selling the extras..
d
I believe thats how the original is installed.___________________________________________
________________________________
Originally posted by bturner2Myself I'll live on the edge and surf without a helmet.
Comment
Originally posted by bigmac View PostHow long is the stock tubing?
I was hoping someone who's experienced this failure and had their hands on the little plastic tubing could give me an estimate, and I'd order one to have on hand..
dave
Comment
Hi Guys, wow this thread has gone a long way since I started it. I have been running my pump for a couple of years now but am concerned about the piece of rubber fuel line i replaced the plastic one with. This find by rudaire looks really good. Anyone looked into it? I think it may be the answer to our problem!
Originally posted by rudaire View PostHas anyone tried to order this stuff??
We manufacture FEP Corrugated tubing and PFA Ultra Pure Corrugated tubing
Seems we could order the 1/4 inch and warm/stretch it over the 5/16 end. I haven't measured the tubing in my X-star, but seems this company could provide a replacement.
Also, I talked to a supply company in my city that swears it is no problem to source either a smooth or corrugated replacement, but I'd have to order bulk, which I've considered doing and selling the extras..
dsigpic
04 197 TT LQ9 stargazer w/Z-Box
Tournament PB 1/4 buoy @ 35 off
Previous...
96 Prostar 205 Lt1
93 Prostar 205 HO
81 Leaves and stripes(Can. edition)
Comment
Originally posted by 95prostar View Postdoes anybody have an aftermarket pump part number for the lt1 pump?sigpic
04 197 TT LQ9 stargazer w/Z-Box
Tournament PB 1/4 buoy @ 35 off
Previous...
96 Prostar 205 Lt1
93 Prostar 205 HO
81 Leaves and stripes(Can. edition)
Comment
LT-1 fuel pumps are engine mounted on the port rear of the motor. Beyond that, I don't know.
Comment
OK, so I sent an email to Texloc and they forwarded it to an engineer in the tech department regarding compatibility of the corrugated hose and gasoline/ethenol.
I will keep everyone posted....sigpic
04 197 TT LQ9 stargazer w/Z-Box
Tournament PB 1/4 buoy @ 35 off
Previous...
96 Prostar 205 Lt1
93 Prostar 205 HO
81 Leaves and stripes(Can. edition)
Comment
Last week my friend and I were changing out the tins on our Harley Davidson Road Kings. His fuel pump had a piece of corrugated fuel line that looked an awful lot like the pictures that I've seen around here. I think he replaced his because I noticed one in his garbage can. It didn't dawn on me until too late that this might be what were looking for. He's got a 2001 Road King-I'll try to get a part number from him to see what he ended up with.2006 Maristar 200 SS
Comment
MasterCraft 2021
All times are GMT-5. This page was generated at 01:22 AM.
Working...
X
Comment