"Mastercraft" label water hoses?

[Jerseydave]

Looking for 1 1/4" water hoses for my manifolds with the "Mastercraft" name on them.
Anyone dealers have these in their inventory?

[psychobilly]

Good luck on finding it.....

Here's what I did....

http://www.mastercraft.com/teamtalk/showpost.php?p=794647&postcount=7

You can go to my pics in my home page and look at them. There are also some recent shots in the Engine thread that I made you can get a good idear of what it looks like. It's not MC logo but it does have a blue stripe, not white or green....

[mayo93prostar]

Dave, I tried to find the hoses with MC on them and was told they are not available anymore both from local dealer in Kent Island, MD (that since has gone out of business) and Jim at BAWS. If you find some, I would like enough to replace all my hoses too.

[Lumbergh]

+1 on the Trident hoses.

I did all of my 1.25" and 1".

Fisheriessupply.com for me.

The blue looks nice in engine compartment.

[lake weir skier]

Has anyone come up with a source for "Mastercraft" labeled 1 1/4 inch water hose? I've seen inquiries in several threads, but not anyone who reported finding it. What did you end up doing, Dave?

[mikeg205]

I should make these -

[Traxx822]

I should make these -

Do it. Mine are old looking. You know the motor is up next on dress ups.

Sent from my HTC One using Tapatalk

[mikeg205]

who makes the blue hose - that would be a nice brand to stencil in a Mastercraft logo into.

[Jerseydave]

Has anyone come up with a source for "Mastercraft" labeled 1 1/4 inch water hose? I've seen inquiries in several threads, but not anyone who reported finding it. What did you end up doing, Dave?

Hmmm, I think I put Trident hoses on there. Ok now I have to pull the cover off tomorrow and have a look. I never found any Mastercraft hoses though.

[lake weir skier]

Hmmm, I think I put Trident hoses on there. Ok now I have to pull the cover off tomorrow and have a look. I never found any Mastercraft hoses though.

I picked up some Shieldsflex II hose today locally. Since I'm just replacing a low hose between the transmission cooler and the raw water pump, I'm just going to turn the hose markings down so the hose will look like a plain black hose, leaving me with other plain black hoses and a "Mastercraft" labeled hose that is black with blue lettering coming off each side of the thermostat housing.

[mikeg205]

so the idea worked...

MC Mask and Plasti-Dip spray - first prototype...lol -

mask spray - reapeat - add a color over white if you want

[mikeg205]

installed

[thatsmrmastercraft]

That looks fantastic Mike!

[mikeg205]

That looks fantastic Mike!

Now to make colors...

[thatsmrmastercraft]

Now to make colors...

Plasti-Dip has a great colors.

http://www.plastidip.com/home_solutions/Plasti_Dip_Blaze