'03 Maristar 230 350 LTR valve cover hoses

[Pointman]

I replaced a blown head gasket and am putting it back together. I've got the pcv valve/hose on the port side that connects to the intake/throttle body but cant tell where the hose on the other side goes. does it feed into the intake/air filter are or just vent?

Can any 330hp LTR owners post pics of this from their boat?

[Mark rsa2au]

I replaced a blown head gasket and am putting it back together. I've got the pcv valve/hose on the port side that connects to the intake/throttle body but cant tell where the hose on the other side goes. does it feed into the intake/air filter are or just vent?

Can any 330hp LTR owners post pics of this from their boat?

On my LTR330 the hose from the valve cover connects to a grey pvc/plastic pipe running underneath the outside of the air filter. Be careful when connecting to this pipe as it is held on with a thin glue layer and gets brittle, but if it does come off it is easy enough to glue back on - just a little fiddle.


Sent from my iPhone using Tapatalk

[Pointman]

thanks!

I appreciate it.