Announcement

Collapse
No announcement yet.

Excessive Water in Bilge

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Make sure to use a small swing check valve so any trash in the bilge can pass thru and not clog it. I had this problem once and had to disconnect the hose to remove the trash from the inlet side of the check valve.

    Comment


    • #17
      Rather than put a check valve in the bilge pump line, I would length the hose is possible and route it higher than the outlet in the hull. This should limit the water coming in and not a risky as a check valve in the bilge pump hose failing.

      Comment

      Working...
      X