What Work did you do on your Mastercraft Today?

[Gianfranco]

that looks nice, what did you use for material ? What is the little knob to the left ?

I bought a 3” black abs pipe and cut one end at 15 degree on my miter saw. The knob is JL amplifier remote level control that is hooked up to the amp powering my wakeboard tower speakers, so I can control the tower speakers volume on the fly.


Sent from my iPhone using Tapatalk

[starman205]

Installed new Bilge Blower, only because I have an aversion to loud noises and fireballs!

[carlsonwa]

that looks nice, what did you use for material ? What is the little knob to the left ?

[Prostar 190]

Made an angle ring for my stereo remote, now I can actually read what the screen says!




Sent from my iPhone using Tapatalk

Nice work

[waterlogged882]

Made an angle ring for my stereo remote, now I can actually read what the screen says!

Looks good. There is an old thread here about a fellow from Australia making pods very similar to that. I actually bought one (US $120) thinking (then) about putting it on my 93 for a remote mount but no where to mount it, as I thought.

Looking for a small dash pod now for my OEM clock.

Another member here ordered and installed the one from Australia in this thread.

Good job on the fabrication.

I like it.

.

[Gianfranco]

Made an angle ring for my stereo remote, now I can actually read what the screen says!




Sent from my iPhone using Tapatalk

[waterlogged882]

With my son taking the boat 3 hours away this weekend, I did not want any issues (X14 on a single axle). Checked the hubs out and this side looked a little milky, the oil seal was seeping on the backside of the hub. The cap came off real easy, the little plug...I'll need a new one.

Good call..

.

[zsqure]

With my son taking the boat 3 hours away this weekend, I did not want any issues (X14 on a single axle). Checked the hubs out and this side looked a little milky, the oil seal was seeping on the backside of the hub. The cap came off real easy, the little plug...I'll need a new one.

[mikeg205]

That model pump does not have a float switch on it.. i dont see the float switch in the pictures

Sent from my SM-G955U using Tapatalk

[RxMC]

Looks good. Fun to get new, shiny parts!

[Prostar 190]

Put a new throttle body on it today.

[waterlogged882]

[ATTACH]204210[/ATTACH]
[ATTACH]204211[/ATTACH]
Fixed the awful bird’s nest of house wiring I found causing a short to the blower. Found a stray wire that went to the bilge pump float switch, wired it up, but it still doesn’t work on auto, just manual. Those auto switches go out by themselves often—or do I need to check wiring again? Seems like it’s only a few years old.

Check wiring. Find a good schematic and re-check. I am not at my primary machine or I'd post it up. You are on the right track.

.

[MarCraft1991]

Fixed the awful bird’s nest of house wiring I found causing a short to the blower. Found a stray wire that went to the bilge pump float switch, wired it up, but it still doesn’t work on auto, just manual. Those auto switches go out by themselves often—or do I need to check wiring again? Seems like it’s only a few years old.

[captain planet]

Waxed and buffed, cleaned seats, scrubbed carpet and drivers foot-well, and refinished the teak platform. The wood of my platform looked so good this year it gave me wood. Finally ready for the water.

On deck is to replace the bunks and carpet with gatorbaks and rebuild some of the bunk supports. I'll get some quality assistance for that welding project.

[FoggyNogginz]

Looking good Kent. Are you in the north or south side of the lake? I'd love to join you for early morning weekday pulls.

Sorry for missing this. I am on the south side in Mt Juliet. Shoot me a text and we can get together one morning.

Sent from my SM-G781U1 using Tapatalk