Announcement

Collapse
No announcement yet.

Hose Sizes for Winterizing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hose Sizes for Winterizing

    I’m trying to prep for winterizing and don’t have access to my boat (‘07 X30, LY6). Does anybody know what size hoses the intake uses for either getting a flush pro or rigging something similar up? Also, what size tube is good to feed through the ballast vents for adding antifreeze? Found a lot of threads discussing the process, but not sizes.

  • #2
    If anybody has this question in the future, my raw water intake hose (and probably most, if not all, models) is 1-1/4”. I was able to feed a 0.5” O.D. tube down the ballast vents for pouring in anti-freeze. Any bigger than that would have been difficult.

    Comment


    • #3
      Originally posted by Skram View Post
      If anybody has this question in the future, my raw water intake hose (and probably most, if not all, models) is 1-1/4”. I was able to feed a 0.5” O.D. tube down the ballast vents for pouring in anti-freeze. Any bigger than that would have been difficult.
      Thank you for following up!

      This forum seems to have gone very quiet in the last few months...

      D2
      2002 X-Star Indmar 5.7 Vortec Predator (SOLD)
      2010 X-STAR Indmar 6.0
      sigpic

      Comment

      Working...
      X