Announcement

Collapse
No announcement yet.

RTP-1 engine block drain question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jewbacca
    replied
    Originally posted by neil.anderson63 View Post
    Make sure you disconnect the garden hose connection between the exhaust manifolds. Usually on the port side above the transmission. You won't get much out of it, better safe than sorry.
    I got that bit! I downloaded the Indmar user manual. It details the process very well.

    Leave a comment:


  • ewilcox11
    replied
    My X1 has no knock sensor.

    Sent from my SM-G981U using Tapatalk

    Leave a comment:


  • neil.anderson63
    replied
    Make sure you disconnect the garden hose connection between the exhaust manifolds. Usually on the port side above the transmission. You won't get much out of it, better safe than sorry.

    Leave a comment:


  • bturner2
    replied
    No knock sensor on my 07 X2.

    Leave a comment:


  • jewbacca
    replied
    Crazy. Good to know the computer won't be compensating when I run my 87 octane gas

    Appreciate the confirmation guys.

    Leave a comment:


  • ttu
    replied
    Originally posted by Footin View Post
    I had an 07 RTP, no knock sensor.
    ^^^^ correct

    Leave a comment:


  • Footin
    replied
    I had an 07 RTP, no knock sensor.

    Leave a comment:


  • ValveCoverGasket
    replied
    Originally posted by jewbacca View Post
    There's an old thread with a similar question. ttu said no knock sensor in his '07 RTP: https://teamtalk.mastercraft.com/showthread.php?t=32955
    there you go! good to know

    maybe there are predator and rtp differences then

    Leave a comment:


  • jewbacca
    replied
    There's an old thread with a similar question. ttu said no knock sensor in his '07 RTP: https://teamtalk.mastercraft.com/showthread.php?t=32955

    Leave a comment:


  • jewbacca
    replied
    I think they're the same engine? Indmar 5.7L 310HP. There's a single wire sensor right above the oil filter, but I'm pretty sure that's the pressure sensor. Nothing else wired up below the exhaust manifolds

    Leave a comment:


  • ValveCoverGasket
    replied
    rtp1 is the predator? i always get that and the ltr mixed up, anyway the predator for sure should have a knock sensor there where your pic is...

    no one pin wires floating around near there?

    Leave a comment:


  • jewbacca
    started a topic RTP-1 engine block drain question

    RTP-1 engine block drain question



    This is my first year with the X1, so just want to be sure I drained the block correctly. There are 2 brass drain plugs on either side of the block I pulled. Lotsa water came out. Can't find a knock sensor. I'm honestly shocked an '08 doesn't have one. Can anyone confirm that the RTP doesn't have knock sensors?

    https://imgur.com/a/m2uUI6b
Working...
X