Depth & Water temp showing nothing

[Rk0899]

at the front of the boat behind the steering panel?

[bturner2]

You could also unplug the transducer from the computer and see if the fuse still blows.

[Rk0899]

Ok good tip I'll trace it back the best I can

[bturner2]

The triducer needs power, if the cable going back to the triducer got pinched or partically rubbed through you could have a short in the cable. I would try to trace that wire all the way from the triducer to the module.

[Rk0899]

2016 X46 - replaced the Triducer and still nothing appearing on the screen for Depth and Water Temp
The paddlewheel circuit button under the dash appears loose and tripped and doesn't want to reset.
Any thoughts?