Go Back   TeamTalk > View Profile

captain planet captain planet is offline

MC Platinum

Visitor Messages

Showing Visitor Messages 1 to 10 of 16
  1. captain planet
    04-16-2020 12:51 PM
    captain planet
    Was actually pretty easy. All those gauges come out from the back side, just a bracket and a small nut on a bolt. Getting the dash off is the trick. The dash has two plastic strips glued to it and they extend down and come in contact with the fiberglass of the deck where the deck goes behind the dash pod. If you get up under the helm you will see two screws that will stick through the fiberglass. You will need to back those out with pliers (tedious and takes time). If you don't take these screws out you will break the plastic straps and then you are in a fix. Once you get these screws out and you take out the steering wheel assembly, the dash will lift out.

    When I put mine back together, I put small bolts with nuts to replace the screws so it comes out easier the next time.

    When you put the through-hull transducer in the bottom of the boat, make sure you stay away from the tracking fins as they will cause it to not read at high speeds (above 35 mpg), at least it did on mine. You can power the depth finder from one of your accessory switches. It is a couple hour job.

    Hope this helps.
  2. turbozinke
    04-16-2020 09:25 AM
    turbozinke
    Hey thanks for posting on my thread about my gauges in my 98 190. I saw that you replaced your clock with a depth finder. I really want to do that. Was it hard?
  3. captain planet
    07-19-2019 01:12 PM
    captain planet
    It's about a 8 year old Ronix womens board. It is basically white with gold trim, bottom is black with gold trim/markings. The boots match and are close toed. I'll get the model this weekend. Don't need new/new boots, just ones that will work that are basically white. I found the board in the attached link.

    http://images.evo.com/imgp/700/17563...-blem-2008.jpg

    It's older than I thought.
  4. MTH7
    07-19-2019 01:40 AM
    MTH7
    When you're getting boots for a board you want to watch 2 things. First is the thread count. Older boards use 1/4" x 20 bolts. Newer boards use M6 bolts. If you try to force them, you'll mess up the threads in the board, then your board is done. The second is the spacing between the bolt holes. Old boards used 8", all new stuff is 6". Newer Hyperlite, Ronix, and Connelly use 6" spread and M6 bolts on their boards and boots.

    I work at a pro shop, we carry Hyperlite, Ronix, and Connelly. I have boots if you're interested. Not sure of your price range or colors you'd want. Most importantly, which Ronix board do you have? Do you know year and model?
  5. captain planet
    03-12-2018 03:01 PM
    captain planet
    No sir. Skylon is gone.
  6. Ben205
    03-12-2018 02:00 PM
    Ben205
    Skylon still for sale??
  7. captain planet
    10-02-2014 08:07 PM
    captain planet
    Not me. I've been winterized since Labor Day weekend.
  8. BozickA88
    10-01-2014 04:38 PM
    BozickA88
    Yea every weekend actually going to be living in Deerfield we have a dock out there. Possibly saw you out sunday morning around 10? I have a Red and black prostar TT
  9. captain planet
    09-25-2014 03:13 PM
    captain planet
    Been at Berlin all my life. I learned to foot beside my buddies 1989 190 back in the day. You at Berlin much?
  10. BozickA88
    09-24-2014 09:21 PM
    BozickA88
    Kind of random how long have you been footin at Berlin. Have tried learning a few times off a kneeboard but always find my face in the water.

About Me

  • About captain planet
    City
    wash
    State
    OHIO
    Location
    Canton, Ohio
    Gender
    M
    Team MasterCraft Member
    yes
    Boat Owned
    2003 PS197, MCX, Powerslot
    Occupation
    geologist
    Interests
    Skiing, Soccer, My wife and kids
  • Signature
    2003 ProStar 197, MCX and Powerslot.

    "When injustice becomes law, resistance becomes duty" - Thomas Jefferson
    "Freedom is beneficial to everyone equally" - Ron Paul

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Today 09:08 AM
  • Join Date: 08-24-2005
  • Referrals: 0

Friends

Showing Friends 1 to 10 of 11

All times are GMT -4. The time now is 10:45 AM.


2020