Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Are you selling just the cans + lights, or are the M770 speakers included as well? And what are you looking to get for each?
-
https://www.youtube.com/watch?v=Yxdv2skQel8
Check out that video. If you had the vehicle in parking brake maintenance mode when you compressed the brake piston back in, then you should be fine. I assume that after the brake job was finished you took the vehicle out of maintenance mode right?...
Leave a comment:
-
Not a lot I can add that hasn't already been addressed by the others here.
I have a 2005 X7, and I really, REALLY, like it. Here is why: I do ALL of the work on my boat myself. The engine location and orientation and lack of a v-drive makes it so much easier to work on. I have had to do...
- Likes 1
Leave a comment:
-
-
I have stopped ordering anything for my boat or my vehicles from, to borrow a term I learned from waterlogged (I think), scamazon. I have received way too many clearly used parts, damaged parts, or simply the wrong part, or the worst yet, a very obvious (or subtle) fake of the legit part. I will gladly...
- Likes 1
Leave a comment:
-
The current rating is in the datasheet I linked.
15A 15-28VDC
Single pole
Dual pole
Dual pole
Dual pole?
The last one I'm not sure of, but sometimes high draw loads like a blower motor are wired up to dual pole switch so each pole provides...
Leave a comment:
-
Are you going to leave the gas lift shocks off permanently? Or is this just for use when you are servicing the engine/trans?...
Leave a comment:
-
Any updates? This mystery is driving me nuts! I have to know what's going on!
BTW the correct name for that white plug is a "cavity plug." How are you pushing on the cavity plug? With your thumb while you hold the rest of the black connector, like in the photo?...
Leave a comment:
-
Upon further searching, it appears that there are some older switches with lighting sequences that are not in the datasheet.
LT2561-604-012, "04" isn't listed in the table, but we can pretty reasonably assume that it was the blue blue blue lighting sequence.
This...
Leave a comment:
-
I would ignore the "0532" printed on the switches, it appears they have changed their part numbering since those were made in 2006.
Take a look at this datasheet: http://pdf.datasheet.live/datasheets...35-401-125.pdf
You want a dual pole...
- Likes 1
Leave a comment:
-
This is a good point that I didn't explicitly call out, thanks bloup101!
If you want the ability to skip/pause bluetooth music from the deck or the remote, the alpine KCE-400BT is the only way.
That said, I really have gotten used to using a bluetooth smart watch to control...
Leave a comment:
-
Thanks for the model number.
REMOTES:
1) This particular model was made to work with Alpine's wireless MC20 remote: https://www.alpine.co.uk/p/Products/SingleView/mc-20
You will be able to control the head unit (including dual zone audio control) and receive...
Leave a comment:
-
Haha thanks! I did see that last night and I have bought them! Now I'll be able to get the skiis off the floor!...
Leave a comment:
-
AND..... its thread resurrection time!
For anyone in the future reading this, between 2001 and 2004 the speed input for the speedometers and perfect pass (unless PP has been upgraded to stargazer aftermarket) come from the paddle wheel into the MMDC on pin 23. Before 2001 the speed comes...
- Likes 1
Leave a comment:
-
OUCH, I paid about 500 for my Hyperlite Shim. I like it a lot, but I am definitely a beginner. I can do deck starts and stops, and ride without the rope. But no tricks or anything yet. I went a size up, because I ride with my 7 year old daughter or my 4 year old son between my legs.
As...
Leave a comment:
-
Can you give us the model number of your alpine deck? This helps with determining the options available for remotes and bluetooth connections.
As far as install, generally you just plug in the RCA connection (or 3.5mm AUX) from the Bluetooth module into an available audio input on the...
- Likes 1
Leave a comment:
-
I notice that this part says "Flame arrestor screens for safety." Is this all that is required for a boat alternator to not ignite gas vapor in the engine compartment? I assumed there was more to it than that but I don't really know.
Trhodes, I agree with what soder recommended,...
Leave a comment:
-
I am not familiar with the grounding layout of the 8.1L V drives, so I can't give specific direction on ground locations. But in general, you want to perform a voltage drop test by setting a DVOM to DC Voltage mode, and backprobing the ground pin of the CKP sensor, the other lead goes directly on the...
Leave a comment:
No activity results to display
Show More
Leave a comment: