My boat was butter smooth at idle. And various points in the RPM range. But then other points had more vibration than I’m comfortable with.
I don’t think I’ll be able to get it tested before the prop goes. We have had anywhere between 2” and 10” of rain over a wide swath...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Ok so I lied. I did the majority of the alignment this afternoon. I got it between .002 and .0025. If I try for any more I’m going to go insane. What a pain!
Leave a comment:
-
Thank you Waterlogged. I've learned over the years to listen when you talk. I will follow your advice tomorrow and re-check the alignment.
I did take some pictures today of everything under the boat. Everything looks good. The shaft spins fairly easily one-handed (even on the smooth...10 Photos
Leave a comment:
-
Thank you for the response so far. This will give me some things to check out before I start throwing parts at it.
There we’re a lot of things that occurred after I lightly bent the blade drifting into shore. I did have the prop fixed and that’s the one I’m...
Leave a comment:
-
Some driveline vibration - where to start?
Last summer I replaced my shaft seal on my 2005 Prostar 197TT. It was leaking bad and was quite worn out. I successfully replaced it and aligned the engine with the shaft. Afterwards, I noticed that there is a noticeable vibration just above idle and around 23ish MPH. Outside of that, the drivetrain...
No activity results to display
Show More
Leave a comment: