You should read post #40

Try these photos again......

I have a 99 Maristar and have been very happy with the Swell Wakesurf creator slim H3X Plus (https://www.swellwake.com/products/c...-slim-h3x-plus )

Not affiliated, just a happy customer. The slim model allows you to get it low and far back. Here are a couple of photos of mine ins...

This site needs a like button lol....

They push docks around with pontoon boats here all the time. Basically put the boat in the slip, tie it up and start pushing it to the destination. Towing is not something I would try. I might be inclined to use a MC to push it but a pontoon boat would be more ideal. Or anybody else's boat for that...

I have no idea. But I did a triple door conversion on my boat last summer and did not retain that recessed plastic piece over the engine. No issues.

I think it was a remnant from the non EFI boats of that model. Carbs may need more head room.

Wow, that looks great. I did the same thing with the sun deck on my '99 Maristar, but have not had a chance to put on the gas shocks and latches yet.

I am interested in the ballast setup. I have fat sacks and a portable pump. Would love to put in the pumps and switches that you did. Can...

Amazon is a bit pricey. Skidim has it for $.95 a foot - https://skidim.com/3in-hose-blower-air-vent.html

Full of sh it for sure.

First, the most vulnerable does not mean the most infectious. So "vaccinating" (in quotes because it is not a vaccine, it is gene therapy and does not in fact do all of what vaccines do) the most vulnerable would not really do what you seem to claim it...

It’s now officially 2 weeks since blue check media, experts & politicians absolutely lost their minds about Texas removing their mask mandate.

Unsurprisingly, cases are down -29% in the two weeks since.

They were wrong. Again. As always.

...

When you try heat, someone told me to use a candle too. Heat the metal and touch the candle to the threads. The wax will melt and get drawn into the threads like solder when sweating pipes. The wax will help in allowing the bolts to turn. I have not tried this myself, but sounds interesting.

Yeah, so much for presuming. After reading my response, seems pretty silly of me. Sorry about that.

Depends entirely on how slow a leak it is. It will certainly make a mess and being petroleum based, having a lot of oil in the bilge is never a good idea. But it is likely manageble for a while with oil absorbing bilge pads and such.

I presume you actually mean the *rear* main engine seal....

Most of the ones I have seen I have found them to be expensive. I would make one, or just have someone film from the boat using a monopole. I would also not recommend using a GoPro. The GoPro is really a POV camera and since the subject will be as many as 75ft away from the camera, I find it to less...

I have the actuator from my 1999 Maristar. If anyone needs it, they can have it for shipping costs. Works fine, I just got tired of it and cut my sun deck into 3 pieces so I don't need the actuator any longer.

The actuator is from about 2010 as the previous owner had replaced it prior...