You need to pull the pins on the on the Surf tabs, drop them down, remove the pins on the platform, then lift up on the platform near the stern and it will fold down. ...

We are on Norris - Pretty much have been following these rules anyway, out of total respect. I checked via google maps, all the places we surf (all in compliance) and mostly places that are shoreline to shoreline, no docks! However my biggest concern is with all the Tooner vigilantist trying to enforce...

I'm late to this party - Signed up last month - which stated they were full in my zip at Camp - Waiting... Believe it or not, we have AT&T wired with a wopping 8mb/second and can stream 2 devices at once. Now upload is painful but at least I can zoom call, wifi call during peak season at...

Ahhh - Some Color basics Kids - Basing True Color off of a web-site and or color monitor display is impossible, even with a true calibrated monitor for print. This is not the fault of the manufacture, it is just color science. The factors of color variation are basically impossible, given additive color...

With gas prices over $4.00/Gallon - New Retrofit Sail Option available for all year MC models. Pretty sure with a good tail wind you can reach 11 knots!!!...

My cover is https://www.skiboatcovers.com/ Highly recommend - Sunbrella material, water line, over tower, not cheap, but an awesome cover!...

That looks like a Premier Front Mount Lift - At least that is who sells this style in TN & KY - I don't know the actual manuf. of this style - Check the weight capacity, looks like a 4500#, but could be 6000# with 2 float drums. They sell for about $10,000 installed new in our area, so if its working...

Sunbrella!...

Over Tower, water line cover from Ski Boat Covers is the best option. Not sure if they have one for the XT22?

...

This is fine for light Ski Boats, however with a standard winch on a heavy wake boat, no way you are going to winch it up. I stripped off a few winch teeth on mine trying to do just that....

Just add Bunk Carpet - Cut to size, 3M 5200 Quick Set Adhesive, entire job was about 15 mins - No more marks, 3 years & counting, no issues. All the R & C Benefits, no marks on the Bow!
...

No offense to R & C - I have the 1st version, love it over the roller - Absolutely hated the roller - Had a Boat Buddy on my X2, again love the concept, worked well if you didn't ram the pin! Like anything, as I explained in my post above, coming in hot and ramming into the bow stop regardless...

Roller should work, but on a steep ramp you are probably too deep, you never want to come in and have the bow able to hit the clamp or roller stop. You want the boat to settle on the bunks short of clamp or roller, then power load her easily up to the stop. My gauge for depth is not the trailer fenders,...

Fuel Vent

I owned an 09' X2 - Loved, loved, loved that boat! Super easy and nimble to dock - Good in rough water - VDIG screen, no issues - Skied OK with the center tab, this is pre-surf tabs. Surfed well with extra ballast listed. WB wake was decent with extra ballast, just a bit wider, not super steep. 07'...