Do you remember if your measurements were the same? We measured 27" from center of eye to eye on Leaf springs, but that's with the boat on there. Hubs insists we should have 28" for the springs. But....if you bought it from Northern tool, their springs are 27".

Didn't you...

Good to know I can get axle and brake actuator there.

Thanks!...

When we measured our leaf springs last night, they were with the boat on the trailer. We measured them from eye to eye and they are 27". My hubs thinks we need 28" but I noticed the Northern Tool shows a 27" spring. What do you guys think?

Thank you so much! I don't think I've looked at ChampionTrailers.com yet. I'll see what they have there!...

This is the first time we took all these measurements so I hope they are correct. If you are familiar with ordering any of these parts, can you let me know if these numbers look correct? I'm hoping I can give this information to various online businesses and get the right parts.

We have...

Gotcha! Thanks ...

Peter - what do you mean by "I would do some careful measuring to verify this?" What exactly would we be measuring?...

Which part number are you referring to? The link that Peter posted that took me directly to Northern tool or is there another part number you are referencing?...

Good to know, thanks. We were thinking about getting the entire kit as well. We want to do this right!...

Lots of pictures on that thread! I think I see the filter you are referring to though. Thanks so much!...

Yeah, my hubs is an automotive machinist and a purist He's seen the damage too often when repairing engines. We only use 91 octane in there....

Can you use any fuel pressure gauge? I'm assuming this is something I can pick up at O'Reilly's perhaps?...

Thanks for the image! That is always helpful ...

Probably not this year, but I think he did that in the past. I'll check and find out. ...

I know we have the first filter you mentioned. I'm not sure about an inline filter. Are you suggesting there might be a filter at the top of the tank on the same assembly?

Any pictures on this might be helpful so we can compare (if anyone has one)....