Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.2503 seconds.
Keywords
Members
Tags
-
I cannot believe the prices from Infinitywave, given you can purchase a Lenco kit for less than $1000! Perhaps there’s something in Infinitywave that I don’t understand..
-
Sorry for the delay.. I just un-winterized yesterday.
Here’s the photo.
1) I put 160 lbs (2-80lb sacks) in the rear locker on the port side and a NautiCurl wake shaper (suction cup) on the hull. With 4 or more in the boat, it is a nicely shaped surfing wake. (Of course, when...
Leave a comment:
-
I’m still very happy with my Bennett Tab. I still slalom behind the boat (I’m almost 67) and the tab still works perfectly. Retracted, it doesn’t interfere with wakeboarding or wakesurfing. I did learn that the connections to the hydraulic cylinders need to be tightened after a...
Leave a comment:
-
Whew! Fixed!
Well thanks to the diagnostic information I was sent, I was able to determine that the problem was a tripped circuit breaker back by the battery box.
The gauges work perfectly. Thanks again to TeamTalk members for their help!
Neil
Leave a comment:
-
Hi,
One more question: If I did choose to move to Analog gauges, Is there any functionality in the MMDC that I would lose?
Leave a comment:
-
-
LTR Gauges Dead
I just un-winterized my 2002 Maristar 210 Indmar LTR and discovered none of the gauges work.
While I found a few posts that point to the MMDC, and another that mentions pin voltages, I didn’t see anything that describes how to definitely diagnose whether or not it’s the MMDC at fault....
-
-
-
-
-
Ready for another season
Replaced the impeller, oiled the teak.
Leave a comment:
-
-
-
Un-winterized the boat today. Changed the impeller, hooked up the hoses, cleaned the upholstery, power washed the carpet.
Sent from my iPhone using Tapatalk
Leave a comment:
Leave a comment: