500 results in 0.5336 seconds.
-
Spring time bump someone will need it eventually -
pm sent I bought lake's and still could use some just in case..Leave a comment:
-
wow i'm way behind In 42 years I've only had 2 but one I had for 35 yearsLeave a comment:
-
you are welcome...I suspect some of those gauges will coming in handy in the future. I have a brand new MMDC just in case mine fails.. At my age I REALLY don't want to do a swap especially my electrical knowledge minimalLeave a comment:
-
Before you go the replacement route...I had similar issues. I found light black corrosion or mold on the terminals of the both inline fuses going into the MMCD. I cleaned them and my problems disappeared. I have had a few gauges fail since then but no MMDC issuesLeave a comment:
-
Even totally blind... a limit today... Ben developed SARDS (Sudden Acquired Retinal Degeneration Syndrome) a couple of years ago. No known cause and no known cure. Of my 3, he was the best Britt I've ever had or ever seen including many field trial winners. He still loves to hunt. He wears snow ski...Leave a comment:
-
John...I'll email the OP to be sure he sees your offer.Leave a comment:
-
If acids are the issue... do most of you run the engine a bit after the oil & filter change? If not the old oil is still on the bearing surfaces
I have always run engine to operating temp , drained the block quickly, then adding the pink antifreeze, then draining the old oil......Leave a comment:
-
I know but I believe in the 5th... Anyway it was a long uphill curving dirt driveway. I thought my 4wd Ranger slip could handle it.. Nope. Driveway was a bit too loose . So I had to back it down. made it about 3/4 down and then gravity won. Nothing major.Leave a comment:
-
no photo it's in my attic we ALL know what it looks like, Right?Leave a comment:
-
New OEM Trailer fender 1977-who knows, $250
This is the RIGHT side looking from the BACK of the boat. I bought this directly from MC. I used a hole saw for the pole. I still have the piece after all these years too It never really sat perfect on the trailer as I believe my trailer was bent due to a minor back up incident. Trailer jackknifed... -
once in a life time experience ^^^^^^^Leave a comment:
-
Pretty a 2003 tach won't work as you have a different MMDC. I have a new? Faria Mastercraft that might work but does not work on my 2003.. What is your Tach numberLeave a comment:
-
I just did a full brake system on my 2003 Reliable single axle trailer. My actuator was doa and the calipers were frozen. I bought the Kodiak kit did not use the parts that the calipers bolt to as removing the hubs looked like far too much work. I have oil bath hubs. I only tow 160 miles a year (...Leave a comment:
-
I put a new Leupold on my 22-250 that I need to shoot in,
do you shoot deer with a 22-250?................That would not be legal here .Leave a comment:
Leave a comment: