I have a 2003 x2 (205v hull pretty sure) Ballast-wise I have the two rear lockers full (i think 750 ea), the KGB (I think 400), and the IBS (I think 550) any tips for the best/largest wakeboard wake? I usually fill the IBS and KGB and fill both rear sacks about half way I ride around 65'-70', going...

Is there a difference between the 2019 NXT ballast fill/drain times vs a 2020 NXT? I know they redesigned the whole lineup but I can’t find anything anywhere about the fill/drain times....

We are redoing a 2008 X2 that we just bought. Does anyone know if you can remove the rear ballast without cutting them?

Does anyone know where to find the outflow check valve for the KGB bag on a 2005 X-45? I replaced the port and starboard tank valves near the manifold next to the transom both of which would not seal and those tanks now fill and empty well, but the KGB won't fill or empty. I'm sure this check valve...

I'm loving our 2016 X23 so far, but have a quick question and after searching everywhere I can't seem to find a thread that covers it.

Does anyone know how heavy the stock rear ballast bags in the X23 are? They seem really small and I'm considering removing them so I can utilize the...

I have a X2 with a plug and play bow ballast bag that’s draining without me emptying it. I can’t see anywhere that it’s leaking.
My initial indication of the bag draining was my aft bilge running and emptying water from the hull while we were surfing.
I’m sure I’m...

So we upgraded our 2008 X2 this weekend with two 460lb rear sacs and the bow sac for the font.

Got a feeling i'm into timers now but something occurred while I was laying in the back of the boat trying to pull off the factory vent hose:

Has anyone incurred cracked or...

Hello everyone,

I was in the process of making a post about all the upgrades that I have made to my 1994 Maristar when I realized that I should elaborate on the ballast setup since it may help some of you out. I still plan on making that other post in the future but I believe this ballast...

I am looking to replace my ballast pump impellers on my 2012 X2. I found an impeller replacement kit with o ring and hardware, thinking i should replace my o ring as I am second owner and I don't know that the first owner ever replaced o rings.

https://www.wakemakers.com/jabsco-ball...

I could’ve sworn in the past I saw that somebody on team talk repairs Dallas pumps. My searches came up empty except for a few discussion threads on how to repair and possibly source parts yourself. Does anyone know of anybody that repairs/rebuilds the jabsco ballast pumps?

Thank you!!

Anyone know where I can get a fuse like this? It’s from the ballast timer control box in my 2008 XStar. Thanks for the help.
...

I purchased a new XT25 a couple years ago and have had multiple issues with the ballast pumps.

Even upon delivery of the new boat, the ballast tanks were not filling properly. We have made the 5 hour round trip back to the dealership multiple times to have ballast pumps replaced, both...

I recently purchased my buddy's x45. I placed the boat back in after winterization from a Mastercraft dealer. I have replaced all three impellers to the ballast system and verified all the pumps are working and functional. However, none of the ballast systems are filling. Is there a valve that could...

I recently replaced the impellers on my boat and now they are not filling the ballast bags in the rear. The impellers are in the right way along with the O-rings. I also tested them right after I did the install to set the timers correctly. The motors are working and running. I even removed the cover...

Hey guys,

I'm going through and making some changes on my 2002 X Star, and am pulling out the factory hard tanks.
I have no need for them, and instead of just throwing them away, figured I'd check to see if anyone here was doing a factory restoration or wanted them.
They're...