What Work did you do on your Mastercraft Today?

[bret]

Well since it rained almost all day and no skiing, changed oil/filter and transmission fluid.

[tex]

Pulled my drivers seat out to try and figure out how to fix it. The two bolts holding it down pulled through when I was doing a bat turn in our Labor Day show!

[Double D]

Had the new amp installed and now all speakers are hooked up and tuned, even to two new tower speakers. Not as pretty as some, but now clean.

[mike koen]

Had the new amp installed and now all speakers are hooked up and tuned, even to two new tower speakers. Not as pretty as some, but now clean.

Okay I have to ask , HOW did you get that boat threw that garage door ?

[Double D]

Okay I have to ask , HOW did you get that boat threw that garage door ?

Let’s just say, I have about 1/2” to spare between the light and the top of the door. I designed the garage around my old boat and made the doors 9’-9” high, as high as I thought I could go. They are 10’ wide so that’s not a problem. The new boat is 9’-8 1/2” from ground to top of tower light, on the tandem trailer.

[Ski-me]

^^ DD, how is the wake on the 214 vs your old 205? Ski wake, that is. If I ever switched, it would be yours with the larger engine (so Yours!!).

[Double D]

^^ DD, how is the wake on the 214 vs your old 205? Ski wake, that is. If I ever switched, it would be yours with the larger engine (so Yours!!).

LOL. I hope to keep mine for a while...

Since we have many people that are part of the Buckeye Bash Crew in our area that have the 214/X14 platform, or have skied both the 205 and the 214, I would suggest more opinions than mine. That would be Mark, Jeff, Rob, Ty, Brian.

There are many factors because even my 94 205, with tower weight and Acme 541, seemed different than OHIOPRO205's 94 205 with OJ prop and no tower. He would say mine was harder.

Now we compare 93ProStar190's 214 "ski" boat with stock prop, the MCX 350, mini tower and no tanks to my X14 with the Acme 1281, heavier tower, heavier LY6 with heavier tranny, and tanks, and I think mine is worse than his.

Position off is also critical because of the 20 something hump.

Only way to know for sure is for you to come to Buckeye Bash next year and ski all of them, because we have them all.

Pic1 - 214
Pic2 - X14
Pic3 - 94 205

..

[mike koen]

My shop is big enough and 12' high but the doors are only 8' wide . Don't know what the previous owner was thinking when he built the place. It was finished inside and painted but not insulated , go figure .I insulated and put in a radiant tube heater , lots of lighting and fresh paint.

[Double D]

My shop is big enough and 12' high but the doors are only 8' wide . Don't know what the previous owner was thinking when he built the place. It was finished inside and painted but not insulated , go figure .I insulated and put in a radiant tube heater , lots of lighting and fresh paint.

Bad planning. But I know you can fit in 8’, but remove your trailer pole pads and expect the poles to rub.

[motomario]

season closed/

[lakedrum03]

Made a giant mess.

Oh, and winterized.

[Prostar 190]

Unfortunately I winterized mine today. Next weekend is my son's birthday and our docks come out at the lake.

[tommurtha]

before & after

[ATTACH]191556[/ATTACH]

[ATTACH]191557[/ATTACH]

[ATTACH]191558[/ATTACH]

[ATTACH]191559[/ATTACH]

[sr56]

Nice cleaning job. What did you use?


Sent from my iPad using Tapatalk

[tommurtha]

Nice cleaning job. What did you use?


Sent from my iPad using Tapatalk

Marykate hull cleaner It's a very strong acid 50 bucks per gallon I use about a half gallon for the sides and bottom.

I use a gas mask. You can't do it without one or a respirator, rubber gloves too.

Starbrite has a reduced acid product that I tried to find info one but I didn't trust it