floor on Ski challenger 1991

[farmertom123]

My floor is in bad need of repair. I've removed the carpeting and have removed the panels down the center. I'm looking at the two side plywood 7/16" panels and they have been secured using fiberglass on the sides and on the center. Two questions:
1. Any ideas on how to remove?
2. Are the two sides with plywood meant to be somewhat watertight pockets. I don't see any weepholes to allow water to go from the sides to the center channel.

I'm thinking that the deck is pretty good from the drivers seat forward and only replacing from the drivers seat back.

Appreciate any advice you can give.

Thanks

Tom

[John Johnson]

Tom you should move your thread down to general discussion or restos and refurbs. Here is a link to a SC resto from this past year in the meantime:

https://teamtalk.mastercraft.com//showthread.php?t=86595