Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Electrical

Thread Tools Display Modes
Old 09-16-2018, 06:18 AM
dcwalkaw dcwalkaw is offline
TT Newbie
Join Date: Jul 2017
Boat: Mastercraft X25 2014
Location: Southeast
Posts: 1
Not reaching set speed

I have a 2014 X25, and yesterday I was having problems reaching my set speed when my cruise was on. I could only reach 9.5 when the cruise was set at 10.6 in surf mode. In Go Home, it would reach 20 mph before losing power and going back to 0 mph (cruise set at 28). I finally figured out if I turned the cruise off then the boat ran fine. Anyone experience this, or might know what is going on?
Reply With Quote
Old 09-16-2018, 07:53 AM
MattsCraft's Avatar
MattsCraft MattsCraft is offline
MC Devotee
Join Date: May 2008
Boat: 2013 X25 - 6.2 Ilmor Baby
Location: Cincinnati, OH
Posts: 1,832
From your description, sounds like the GPS puck is bad. It is the black puck just outside the windshield on the drivers side - You can follow the wire from here under your dash & see where it plugs in, I would start by re-seating the plug to see if that helps, other than that, you'll probably need a new one from your dealer.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 11:39 AM.