Tweet
currently have all WetSounds speakers/amps.
syn4 amp (125x4) driving a pair of WS Revo 6s. 2 channels currently unused.
sdx6 sinister amp (185x6) driving 4 Revo 8s (185x4) and a 12” hp sub in a sealed fiberglass box (585x1).
i just purchased a pair of Rev 8 tower speakers.
Q #1 Right now I have 2 empty channels on my Syn4 amp (125x2) for the new Rev8s but I am thinking I should move the 12” sub from the SDX6 bridged (585watts) over to the Syn4 bridged (400 watts) and free up 185x2 for the new Rev8s over 125x2 on the Syn4. Any thoughts? The sub currently has the gain turned down and it still hits plenty hard.
Q #2 I have the MC-1 headunit. Should I move the pair of Revo 6s to the headunit and bridge the Syn4 (400x2) for the new Rev 8s? (I can then leave the Sub on the SDX6 pushing 585x1).
Q #3 Am I wasting the SDX6 by running 4 channels in 4ohm to the 4 Revo 8s? I dont really need separate zone control over the 4 Revo 8s but I can’t bridge the 4 channels and run the 4 Revo 8s at 585x2 because I’ll be at 2ohms. If I wired the Revo 8s in series does anyone know the bridged output of 4 channels at 8 ohms? Any other config I am missing to push the Sinister amp more? (I don’t have the ability or space to add more speakers).
syn4 amp (125x4) driving a pair of WS Revo 6s. 2 channels currently unused.
sdx6 sinister amp (185x6) driving 4 Revo 8s (185x4) and a 12” hp sub in a sealed fiberglass box (585x1).
i just purchased a pair of Rev 8 tower speakers.
Q #1 Right now I have 2 empty channels on my Syn4 amp (125x2) for the new Rev8s but I am thinking I should move the 12” sub from the SDX6 bridged (585watts) over to the Syn4 bridged (400 watts) and free up 185x2 for the new Rev8s over 125x2 on the Syn4. Any thoughts? The sub currently has the gain turned down and it still hits plenty hard.
Q #2 I have the MC-1 headunit. Should I move the pair of Revo 6s to the headunit and bridge the Syn4 (400x2) for the new Rev 8s? (I can then leave the Sub on the SDX6 pushing 585x1).
Q #3 Am I wasting the SDX6 by running 4 channels in 4ohm to the 4 Revo 8s? I dont really need separate zone control over the 4 Revo 8s but I can’t bridge the 4 channels and run the 4 Revo 8s at 585x2 because I’ll be at 2ohms. If I wired the Revo 8s in series does anyone know the bridged output of 4 channels at 8 ohms? Any other config I am missing to push the Sinister amp more? (I don’t have the ability or space to add more speakers).